Twin lever control 4500 TLC is a Twin Lever Control with split gear and throttle commands. As an extension of the 4500 electronic control system, it offers the same flexibility, modularity and ease of installation AISI 316 • Pureand easy installation with plug and play functions • Fastto 60 meters between deck and engine room • Up assignment of throttle and gear to each lever • Free or without interlock at speed direction change • With lever stroke for a precise speed setting (166 degrees) • Long

^system configurations • The distance between the various devices and specifically the distance between levers, lever and actuator or between actuators is = 7.5 m; in case you need longer cables (especially between the deck and the engine room) they must be defined when ordering. • All electrical wirings to connect the actuator to the motor and the actuator to the gearbox, are as standard 3 meters. If longer cables were required, it must be communicated when ordering. There are specific cablings for motors like FNM, FPT, Nanni Diesel, Vetus,Volkswagen, Hyndai, etc. In this case you must communicate...