3000 Mechanical control These mechanical lever controls are available in several versions and fulfil all the possible application requirements including pleasure boats, passenger boats and professional vessels. There are also available versions for the direct control ' of electronic and CANBus motors. MOVEMENTS Single lever with dual action for the sequence command of Extremely smooth and precise, due to the bearings and sin- gearbox and throttle. The button, when inserted into the tered bronze bushings; there are no plastic parts. body of the lever, disengages the gearbox and enables the acceleration of the engine in neutral (warm-up). AESTHETICS • Body box is available chrome plated, painted black or STROKES stainless steel (only for the version with 1 motor). From 60 to 80 mm both for gearbox and throttle (you can get • Lever can be either chrome or stainless steel. Handle and a fine regulation by tuning the slot inside the lever). button for warm-up are available red or black.

COMMAND CABLES Command levers Series 3000 can be used with conventional push-pull cables E3 (thread 10/32), E4 (thread 1/4 x 28) E6 (thread M6) and the very performing Flexball cables Series 70 (M6 thread). VERSIONS • 3000.1 model for one motor or 3000.2 model for two motors for boats with a single command station • in case of boats with more command stations: 3033.1 to be connected with one or more repeater levers 3030.1, in case of boats with 1 motor 3033.2 to be connected with one or more repeater levers 3030.2, in case of boats with 2 motors. 3000 MECHANICAL CONTROL > 2 di 8 SYSTEMS WITH...

INSTALLATION SCHEME FOR 2 COMMAND STATIONS AND 1 MOTOR 3000 Repeater 1 motor Gearbox Throttle Note: mmmmm is the cable length in mm INSTALLATION SCHEME FOR 2 COMMAND STATIONS AND 2 MOTORS 3000 Repeater 2 motors Gearbox Throttle Gearbox Throttle Note: mmmmm is the cable length in mm FLEXBALL I T A L I A N A WR CONTROLS GROUP

INSTALLATION SCHEME FOR 2 INDEPENDENT COMMAND STATIONS Note: ff is the cable length in feet. Example: cable E3 L=10 feet → E3-10F

OVERALL DIMENSIONS FLEXBALL I T A L I A N A WR CONTROLS GROUP

MECHANICAL CABLES AVAILABLE WITH LEVERS SERIES 3000 70 • Flexball type terminal with form M 70 • Flexball typeterminal with form F Note: mmmmm is the length in mm mm.mm is the length in meters

Flexball Italiana S.r.l. Via San Luigi 13/A - 10043 Orbassano (To) - Italy Tel 0039.011 90.38.900 - Fax 0039.011 90.38.747 [email protected] www.flexballitaliana.com FLEXBALL I T A L I A N A WR CONTROLS GROUP