Tubing clamp systems RQMR-MOVE Tubing clamp systems for light, medium and heavy duty applications, EN 45545-2 (HL3) Moveable insert for heavy tubing holder RQM with additional ribbed, fixing for strain relief, for flexible applications, V0 acc. to UL 94, EN 45545-2 (HL3) APPLICATIONS: - Application: for heavy duty applications / machine and plant constructions / insulated electrical installations for application rules machine and plant constructions acc. to DIN EN 60204 / Railway Industrie CHARACTERISTICS: - Properties: assembly only with tubing clamp RQM - rational tubing assembly for corrugated tubings with coarse and fine profile - smallest outer dimensions - free of silicone, cadmium, halogen - self-extinguishing - vibration resistant - fit for high mechanical stress - impact-resistant Recommendations for any areas of applications, products, or product combinations are issued to the best of FLEXA´s knowledge and experience. The user is requested to check applicability of FLEXA products to specific applications and purposes prior to the use of the particular products. All documentation, illustrations, and charts published are subject to copyright and must not be copied, changed, used, or modified. Technical drawings, certificates, authorizations, and results by the FLEXA lab will be provided upon request. FLEXA will not be held liable for typographical or other errors and incorrect drawings. Technical modifications are subject to change without prior notice. FLEXA GmbH & Co Produktion und Vertrieb KG | Darmstädter Straße 184 | 63456 Hanau Germany | Tel +49 6181 677-0 | Fax +49 6181 677-277 | www.flexa.de | flexa@fle