Special protective conduits HG-CU-F Special protective conduits Wire braiding consisting of fine, round braided wires with double crossed looping at the different braiding angles, Coverage: > 85% tinned copper CHARACTERISTICS: - Properties: axially pushed together, in a certain proportion, depending upon the construction of the braiding up to the double diameter - easy pulling in of cables - the braiding becomes tight by stretching - protection from hot swarfs - high shielding factor - screening factor up to 30 MHz acc. to EN 50289-1-6 up to 80 dB Metallic silver Metallic silver Metallic silver Metallic silver - Application: cable bundling / machine and plant constructions / automotive / railway industry / shipbuilding / automation / electrical installations / EMC applications Weight [kg|m] Metallic silver Metallic silver Metallic silver Metallic silver Recommendations for any areas of applications, products, or product combinations are issued to the best of FLEXA´s knowledge and experience. The user is requested to check applicability of FLEXA products to specific applications and purposes prior to the use of the particular products. All documentation, illustrations, and charts published are subject to copyright and must not be copied, changed, used, or modified. Technical drawings, certificates, authorizations, and results by the FLEXA lab will be provided upon request. FLEXA will not be held liable for typographical or other errors and incorrect drawings. Technical modifications are subject to change without prior notice. FLEXA GmbH & Co Produktion und Vertrieb KG | Darmstädter Straße 184 | 63456 Hanau Germany | Tel +49 6181 677-0 | Fax +49 6181 677-277 | www.flexa.de | flexa@flexa.