Magnetic Solutions 2023
1 / 56Pages

MAGNETIC SOLUTIONS 2023 LIFTING • CLAMPING • HOLDING

Magnetic Lifting Flaig Magnetsysteme GmbH from Hardt in the Black Forest has been manufacturing magnets for lifting, clamping and holding for 21 years. We manufacture a wide range of standards and special solutions of all kinds on modern machines. Our experience and innovative spirit make us a competent partner for magnetic applications. Flaig Magnet Systems - From experience and innovation

Content Lifting Magnets Lifting magnets are the perfect load handling device for anyone who needs to work quickly and safely. A multitude of advantages speak for their use, wherever loads have to be held without a handle. In material storage, transportation, 昀椀xture construction and when loading and unloading machines. We o昀昀er a wide range of di昀昀erent designs and technical concepts, from the broadly applicable standard product to the individually tailored for your special application. special magnets. When selecting lifting magnets, please refer to the technical information starting on...

Magnetisches Heben Magnetic Lifting FX-Lift is the product line developed according to the needs of the users Permanent Lifting Magnets Electro-Permanent Lifting Magnets FXE 50 - for sheets from 4mm and workpieces with small air gap The FX base unit is suitable for 昀氀at and round material FX-R - suitable if you need to lift mostly round and/or hot material FXE-L 50+ - long design with reinforced magnet system for tubes, beams and strips FX-P - when it comes to sheets less than 12mm thick and tubes - the right device for the laser cutting machine FXE 80 - for lifting sheets from 8mm; for...

Magnetic Lifting FX lifting magnets are the new innovative product in the 昀椀eld of magnetic lifting technology. They operate with a single-magnet system consisting of high-energy half-shell magnets, which can be fully activated in only 90° switching travel, and works completely recoilless and selfbraking. The solid, ball-bearing mounted switching shaft with the built-up half-shell magnets has no magnetic losses due to internal short-circuiting and can be manufactured in one piece over its entire length without welds or tapered transitions, and without milled recesses for block magnets,...

Magnetic Lifting Magnetisches Heben Exclusive Bene昀椀ts of the FX-Series FX - Economically the right decision FX - Technically the right decision • Made in Germany • Standard-compliant and tested CE/EN 13155/MRL 2006/42 EWG • Product liability insurance with a German insurance company • Multilingual Documentation • Environmentally friendly and future-proof by higher Power with lower SE Magnet consumption • 3 years Warranty • Safety factor 3,5 • supply of spare parts guaranteed for 10 years • CAD Data available • Facilitated document management for work safety 100% nickel High Energy...

FX Universal Permanent Lifting Magnets FX lifting magnets in standard design convince by their wide field of application. The FX achieves good results with large air gaps as well as with thin fiat and round materials with a compact design and low weight. The device is characterized by great robustness and a very good price/performance ratio. Model 0100-450 mm 500 kg 0100-450 mm 750 kg 0120-600 mm 1000 kg 0250-600 mm 1500 kg Safety factor 3,5/Test method EN 13155 max. Operation temperature 80°C • Load charts and Safety from Page 48 Load Charts and Safety from Page 48

FX-R is the lifting magnet series for round material handling. The deep shallow-angled prism ensures safe positioning on the load and directs the magnetic field deep into the material. The magnet system can be switched well in the entire diameter range and does not recoil, shearing of the load due to twisting is prevented by the overlapping prism. Flat material, even with low material thickness, is no problem for the FX-R. The deep shallow-angle prism protects the magnet field deep into the material. With hot workpieces, the deep prism protects the magnetic core from overheating. Anti-twist...

FX-P is the lifting magnet series for professional lifting and moving of thinner sheets, tubes and bars. The special magnet configuration in combination with the prismatic pole of the FX-P ensures maximum flux density at low material thicknesses. The FX-P is easy to position and operate on round material. Model Load Charts and Safety from Page 48 FX-P170 FX-P330 FX-P650 Safety factor 3,5/Test method EN 13155 max. Operation temperature 80°C • Load charts and Safety from Page 48

FX-VV are perfect for metal construction. They have a long, narrow design for picking up beams and profiles - even on the inner web of the beam - and achieve their maximum holding force even with comparatively low material thickness, so that even thin sheets can be lifted safely. Thanks to the 90° double prism, angle profiles can now be picked up inside and outside or components can also be turned. The FX-VV, like all FX models, has a completely nickel-plated magnet body and delivers very good test results, even with rough surfaces. The FX-VV also has a stable, smooth-running single-hand...

FX-C lifting magnets have a round, multi-pole clamping surface, designed for lifting rings, sleeves, bearing housings, flange plates and similar workpieces. The load specification applies to full-surface contact with workpieces covering D inside to D outside (see table of dimensions); for workpieces with a smaller contact surface, a maximum workpiece weight of 3.5 kg per cm2 of clamping surface can be roughly calculated. For series workpieces, a documented test should then confirm the safety factor of 3.

FX-R100 Pneumatic FX-R225 Pneumatic FX-R450 Pneumatic 0 25-150 mm 80 kg 0 50-205 mm 225 kg 0 50-270 mm 450 kg Safety factor 3,5/Test method EN 13155 max. Operation temperature 80°C Safety factor 3,5/Test method EN 13155 max. Operation temperature 300°C

The FX-HV Horizontal Vertical System meets almost every need with its wide range of adjustment options. Overall height and center of gravity can be adjusted via plug-in bolts. Likewise, the unit can be used for up to 20% of its rated load without the undergripping supports. The support bolts are positioned in such a way that upright circular blanks can be attached, which is often required at the saw, for example. Likewise, horizontal discs and sheets can be set up. For horizontal transport, the system has a crane eye on the back. The steel construction is completely powder-coated, and the...