LED 3X3 W

Product catalog summary

Overview

This document provides a detailed catalog and ordering guide for Tube Clamps Series A, covering clamp sizes, materials, fastening options, assembly instructions, and order codes to support precise selection and configuration.

1. Clamp Half Combinations and Fastening Options

Clamp halves are available in four main configurations: with weld plate, with weld/screw plate, with rail nuts, and without plates.
Each configuration supports various fastening methods including slotted head screws with bushes, hexagon socket head screws with bushes, and cover plates with hexagon head screws.
Custom combinations not listed require ordering individual components separately (refer to pages 16–20).

2. Assembly Notes and Recommendations

Size 0 clamps are unique in being secured by only one screw, differing from standard illustrations.
For solid rubber tube clamps, use cover plates, hexagon head screws, and locking washers to ensure secure fastening.
Clamps are delivered as unassembled individual components unless otherwise specified, allowing flexible assembly.

3. Materials and Order Codes for Clamp Halves

Materials offered include Polypropylene (RAPR), Polypropylene inside smooth variant (RAPG), Polyamide 6 (RANR), Polyamide 6 inside smooth variant (RANG), Solid Rubber (RAVG), and Aluminium (RAAR).
Standard abbreviations can be replaced in order codes to reflect the chosen material.

4. Clamp Sizes and Corresponding Specifications

Clamps are categorized by nominal tube outer diameter (O.D.) and nominal bore (NB), with sizes ranging from very small (4 mm O.D.) to large diameters (up to 101.8 mm O.D.).

Clamp Size	Tube O.D. (mm)	Tube O.D. (inch)	Tube NB	Order Code Prefix
0	4 - 12	G 1/8, 5/16	Various	RAPR 16-xxx / RAPR 18-xxx
1	4 - 12	G 1/8, 5/16	Various	RAPR 16-1xx / RAPR 18-1xx
2	12.7 - 18	G 1/4, G 3/8, 1/2, 5/8	Various	RAPR 16-2xx / RAPR 18-2xx
3	19 - 25.4	G 1/2, 3/4, 1	Various	RAPR 16-3xx / RAPR 18-3xx
4	26.9 - 30	G 3/4	Various	RAPR 16-4xx / RAPR 18-4xx
5	32 - 42	G 1, G 1 1/4, 1 1/2	Various	RAPR 16-5xx / RAPR 18-5xx
6	44.5 - 57	G 1 1/2, 1 3/4, 2	Various	RAPR 16-6xx / RAPR 18-6xx
7	57.2 - 76.1	G 2, G 2 1/2, 2 1/4, 2 3/4, 3	Various	RAPR 16-7xx / RAPR 18-7xx
8	88.9 - 101.8	G 3, 3 1/2, 4	Various	RAPR 16-8xx / RAPR 18-8xx

5. Ordering Instructions and Critical Notes

Order codes are structured with prefixes indicating material and size, e.g., RAPR 16-xxx for polypropylene and RAPR 18-xxx for polyamide.
For special or custom combinations, order individual components separately as per referenced pages.
Ensure the use of cover plates, hexagon head screws, and locking washers when assembling solid rubber clamps to maintain secure fastening.
Size 0 clamps require special attention due to their single screw fastening method.
Delivery is generally unassembled to allow flexible configuration and assembly.

Summary

The document serves as a comprehensive reference for selecting and ordering Tube Clamps Series A, detailing multiple material options, fastening methods, and sizes with corresponding order codes. It highlights critical assembly practices, especially for solid rubber clamps and size 0 clamps, and supports modular ordering through individual components for customized configurations.

Catalog excerpts

ROHRSCHELLEN SERIE A TUBE CLAMPS SERIES A KOMPLETT-PROGRAMM COMPLETE RANGE Order codes for clamp-halves: Polypropylen RAPR innen glatt RAPG innen glatt RANG Aluminium RAAR Bei Bedarf Standardkurz-zeichen RAPR in der Spalte ..Schellenhalften" austauschen. Polypropylene RAPR inside smooth RAPG inside smooth RANG Aluminium RAAR Replace standard abbrevition RAPR in column “clamp-halves" as required. 2 Schellenhalften mit AnschweiBplatte, Innensechskantschrauben und U-Scheiben SchellengroBe Clamp size RAPR RAPR RAPR RAPR RAPR RAPR RAPR RAPR RAPR Bestellzeichen Order Codes Bestellzeichen Order Codes Bestellzeichen Order Codes Werden andere Kombinationen benotigt, so bestellen Sie diese bitte in Einzelteilen (Bestellzeichen hierfur siehe Seiten 16 - 20). Die Auslieferung erfolgt unmontiert in Einzelteilen. 1)Schellen der GroBe 0 werden in Abweichung von den Abbildungen nur mit einer Schraube befestigt. 3)Bei Montage mit Vollgummi-Schellen sind Deckplatten, Sechskantschrauben und Sicherungsscheiben zu verwenden If different combinations are required, we would be obliged if they could be ordered as seperate components (Please refer to individual components, pages 16 - 20). Delivery in unassembled individual components. 1)Contrary to illustration size 0 clamps are secured by only one screw. 3)When assembling solid rubber tube clamps, to use cover plates, hexagon head screws and locking washers

Open the catalog to page 1

KOMPLETT-PROGRAMM COMPLETE RANGE ROHRSCHELLEN SERIE A TUBE CLAMPS SERIES A Polypropylen RAPR innen glatt RAPG innen glatt RANG Aluminium RAAR Bei Bedarf Standardkurz-zeichen RAPR in der Spalte ..Schellenhalften" austauschen. Polypropylene RAPR inside smooth RAPG inside smooth RANG Aluminium RAAR Replace standard abbrevition RAPR in column “clamp-halves" as required. Order codes for clamp-halves: Bestellzeichen fur Schellenhalften: 2 Schellenhalften mit AnschweiB/Anschraubplatte, Schlitzschrauben und U-Scheiben 2 clamp halves with weld/ screw plate, slotted head 2 Schellenhalften...

Open the catalog to page 2

ROHRSCHELLEN SERIE A TUBE CLAMPS SERIES A KOMPLETT-PROGRAMM COMPLETE RANGE Polypropylen RAPR innen glatt RAPG innen glatt RANG Aluminium RAAR Order codes for clamp-halves: Polypropylene RAPR inside smooth RAPG inside smooth RANG Aluminium RAAR 2 Schellenhalften mit T ragschienen-Muttern, Schlitzschrauben und U-Scheiben 2 clamp halves with rail nuts, slotted head screws and bushes 2 Schellenhalften mit Tragschienen-Muttern, Innensechskantschrauben und U-Scheiben Bei Bedarf Standardkurz-zeichen RAPR in der Spalte ..Schellenhalften" austauschen. Replace standard abbrevition...

Open the catalog to page 3

ROHRSCHELLEN SERIE A TUBE CLAMPS SERIES A KOMPLETT-PROGRAMM COMPLETE RANGE innen glatt RAPG innen glatt RANG Aluminium RAAR Bei Bedarf Standardkurz-zeichen RAPR in der Spalte ..Schellenhalften" austauschen. Order codes for clamp-halves: Polypropylene RAPR inside smooth RAPG inside smooth RANG Aluminium RAAR 2 Schellenhalften mit Schlitzschrauben und U-Scheiben 2 clamp halves, slotted head screws and bushes 2 Schellenhalften mit Innensechskantschrauben und U-Scheiben Replace standard abbrevition RAPR in column “clamp-halves" as required. SchellengroBe Clamp size RAPR RAPR RAPR RAPR RAPR RAPR RAPR RAPR RAPR...

Open the catalog to page 4

ROHRSCHELLEN SERIE A TUBE CLAMPS SERIES A KOMPLETT-PROGRAMM COMPLETE RANGE innen glatt RAPG innen glatt RANG Aluminium RAAR Bei Bedarf Standardkurz-zeichen RAPR in der Spalte ..Schellenhalften" austauschen. Order codes for clamp-halves: Polypropylene RAPR inside smooth RAPG inside smooth RANG Aluminium RAAR 2 Schellenhalften mit Deckplatte und Sechskantschrauben 2 clamp halves, and hexagon head screws Replace standard abbrevition RAPR in column “clamp-halves" as required. SchellengroBe Clamp size RAPR RAPR RAPR RAPR RAPR RAPR RAPR RAPR RAPR RAPR RAPR RAPR RAPR RAPR RAPR RAPR RAPR RAPR...

Open the catalog to page 5