WORKHOLDING & POSITIONING GRIPPERS
74Pages

WORKHOLDING & POSITIONING GRIPPERS EDGE Precision Tooling Plates, Blocks & Locators 189 Quick Release Ball Lock Pins & Fasteners 315 Spring & Ball Plungers 377 Adjustable Levers & Handles 407 Hand Wheels & Crank Handles 483 Machine Accessories 509 WORKHOLDING & POSITIONING GRIPPERS THRUST SCREWS

Rest Pads & Gripper Pads Solid Carbide High impact carbide pads. Can be brazed or bonded into place. Carbide Tipped Constructed with a high impact carbide pad brazed to a heat treated alloy steel body. Mounts with tapped hole or a flat on the outside diameter for set screw mounting. Hardened Steel Made from 8620 steel, carburized and hardened to Rc 58/60 .050" case with black oxide finish. Mounts with tapped or counter bored hole. Non-Marring Delrin Manufactured from white Delrin. Mounts with tapped or counter bored hole. Stainless Steel The pad is made from 17-4 stainless steel, hardened...

High Speed Tool Steel Round, square, edge, and angle grippers manufactured from M-2 high speed tool steel, hardened to Rc 60/62 with black oxide finish. Mounts with tapped hole, counter bored hole or a flat on the outside diameter for set screw mounting. Carbide Tipped Round, square, and angle grippers constructed with a high impact carbide pad brazed to a heat treated alloy steel body. Mounts with tapped hole or a flat on the outside diameter for set screw mounting. Solid Carbide Round and square grippers manufactured from high impact carbide in a solid gripper pad or as a solid gripper...

THREADED ADJUSTABLE GRIPPER OVERVIEW Carbide Tipped Round and Hex head styles constructed with a steel body. Carbide tipped for positive holding and wear resistance. High Speed Steel Manufactured from M-2 high speed tool steel, hardened to Rc 55/58. Internal hex on backside allows for positioning adjustment. AdjustaGripTM The gripper pad can be replaced when it becomes worn. Uses tapped through hole grippers. AccuGripTM Designed to fit within chuck jaws to adjust concentricity. Carbide tipped for wear resistance. SWIVOTS® & THRUST SCREW OVERVIEW Swivots® & Thrust Screw Replaceable Balls...

SWIVOTS® & THRUST SCREW OVERVIEW ■ Unique design allows the pad and ball cup to swivel, tilt, clamp, grip, hold position and secure a work piece. ■ The internal ball cup allows the pad to rotate 360 degrees and tilt at varying degrees from center. ■ Interchangeable parts speed setups and changeovers. ■ O-ring holds the ball in place and keeps out dirt and other contaminants. ■ Replaceable pad design allows for easy change out when the pad is worn or a different contact surface is required. ■ The unique design of the Swivots prevent the ball from exceeding the specified degree of swivel...

TRIGRIP WORKHOLDING GRIPPERS SYSTEM Typical Clamping Min. Clamping With as little as 2mm (.08") of workpiece clamp surface to securely hold the Surface Surface workpiece, TriGrip workholding grippers are ideal for 5-axis machining operations (Double Row) (Single Row) and minimizing scrap material. The TriGrip grippers offer many advantages over 3.5mm (.14”) 2mm (.08”) traditional clamping systems including exceptional clamping stability, no need for pre-machining or dovetailing workpieces, vibration dampening and allowing for very secure holding at lower clamping forces to avoid deforming...

TGJ-06P TGJ-06 These jaw sets allows you to use TriGrip inserts on Kurt 6" vises. Set includes one pair of jaws, Torx T9 wrench and 10-pack of screws. TGJ-06P also includes one pair of quick change 41 mm parallels. On TGJ-06P, install and uninstall the parallels easily by hand with no additional tools necessary. D D1 L L1 L2 W W1 H H1 Parallel Height Parallel Pairs Parallel Height Part #Qtymm_ TriGrip Screws These screws are used to mount the TriGrip workholding inserts. Includes set of 10 Torx T9 screws. Torx Part #_Qty_mm Aluminum Protective Covers These covers...

Hatch Surface Least surface contact; Increased surface pressure; forces applied over reduced contact area Fine Hatch Surface Medium surface contact; Medium surface pressure; forces applied over reduced contact area Smooth Surface Greatest surface contact; Gripping forces evenly distributed Rubber gripper pads are ideal for industrial grade contact wear points in automation and positioning applications. Black nitrile rubber (60A durometer) is molded to a malleable aluminum backing that can be formed to round or sharp corners. The aluminum backing is 1/16" thick. Select the smooth surface for...

FIXED GRIPPERS Fixtureworks I 33792 Doreka Dr., Fraser MI 48026 I Phone: 586-294-1188 I Fax: 586-294-4843 I www.fixtureworks.net

FIXED GRIPPERS Made from M-2 high speed steel. Hardened to Rc 60/62 with black oxide finish. Serrated for positive holding in tough applications. Thru-hole tap. Flat on O.D. for set screw mounting. See page 232 for tooth pattern specifications. See page 233 for mounting specifications. Fixtureworks I 33792 Doreka Dr., Fraser MI 48026 I Phone: 586-294-1188 I Fax: 586-294-4843 I www.fixtureworks.net

FIXED GRIPPERS Round Style I Carbide Tipped I Serrated I Tapped I Inch & Metric Constructed with a serrated carbide gripper pad brazed to a heat treated alloy steel body. Blind-hole tap for back side mounting. Flat on O.D. for set screw mounting. See page 232 for tooth pattern specifications. See page 233 for mounting specifications. INCH *Keyway= .130" width, .060" depth C B Flat Part #_Height Pos. Flat Pad Tooth Width Dia. Pattern INCH DIAMETERS WITH METRIC THREADS B Flat Flat Pad Tooth Part #Height Pos._WidthDia. Pattern Fixtureworks I 33792 Doreka Dr., Fraser MI 48026...

FIXED GRIPPERS Fixtureworks I 33792 Doreka Dr., Fraser MI 48026 I Phone: 586-294-1188 I Fax: 586-294-4843 I

FIXED GRIPPERS Round Style I Tool Steel I Serrated I Counter Bored I Inch & Metric Made from M-2 high speed steel. Hardened to Rc 60/62 with black oxide finish. Serrated for positive holding in tough applications. Counter bored hole for front mounting with a socket head cap screw. See page 232 for tooth pattern specifications. See page 233 for mounting specifications. INCH Part #_Height_Depth 1/2" Dia - Counter Bored for #8 SHCS HS-50-C_3/8_7/32 Tooth Pattern Fine EF SF Fine EF SF 5/8" Dia - Counter Bored for #8 SHCS HS-62-C_3/8_7/32 3/4" Dia - Counter Bored for #10 SHCS HS-75-C_3/8_V4_...