Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Fixtureworks
  3. QUICK RELEASE BALL LOCK PINS

QUICK RELEASE BALL LOCK PINS

QUICK RELEASE BALL LOCK PINS
1 / 1 PageView full catalog

QUICK RELEASE BALL LOCK PINS

Product catalog summary
Material Specifications: The document outlines the material specifications for Fairlane quick release ball lock pins, detailing the materials used for different components such as shanks, spindles, handles, wear collars, actuator buttons, springs, balls, bails, and split rings. The materials include various grades of stainless steel (CRES 17-4PH, CRES 304, CRES 303, CRES 302, CRES 440C) and aluminum (2024-T4, 380 Die Cast), with specific treatments like heat treatment, passivation, anodization, and plating.
Performance Data: The document provides performance data for both inch and metric sizes, including hole size, minimum pull-out strength, and calculated double shear strength for different materials (4130 Steel, 17-4 Stainless Steel, and 300 Series Stainless Steel). The data highlights the tensile strength and treatment specifications for each material, emphasizing that 300 Series Stainless Steel is not recommended for applications involving shear forces.
Key Parameters: The tensile strength for 17-4 Stainless Steel is a minimum of 190,000 lb/in², while for 4130 Alloy Steel, it ranges from 160,000 to 180,000 lb/in². The document also specifies the heat treatment hardness (RC) for various components, ensuring durability and performance under stress.
Recommendations: The document advises against using 300 Series Stainless Steel in applications where shear forces are significant, due to its lower shear strength compared to other materials.
See more

Catalog excerpts

QUICK RELEASE BALL LOCK PINS-1

QUICK RELEASE BALL LOCK PINS Material Specifications for the Fairlane pins shown in this catalog. 17-4 SS PINS CRES 17-4PH (Stainless Steel) (AMS-5643) (UNS S17400) (DIN 1.4542) Heat Treated Min. RC-40 Tensile Strength = 190,000 lb/in2 Minimum Passivated Finish SHANK – Metric CRES 17-4PH (Stainless Steel) (AMS-5643) (UNS S17400) (DIN 1.4542) Heat Treated Min. RC-40 Tensile Strength = 190,000 lb/in2 Minimum Passivated Finish SPINDLE CRES 17-4PH (Stainless Steel) (Internal) (AMS-5643) (UNS S17400) (DIN 1.4542) Heat Treated Min. RC-40 Tensile Strength = 190,000 lb/in2 Minimum Passivated Finish HANDLES Aluminum 2024-T4 (Aluminum Ring, (ASTM-B211) (UNS A92024) (DIN AlCuMg2) Button, & Domed) Anodized Finish (Black) HANDLES CRES 303 Stainless Steel (Stainless Ring, Button, (ASTM-A581) (UNS S30300) (DIN 1.4305) Nautical Recessed, Passivated Finish & Domed) HANDLES Aluminum 380 Die Cast (T & L) (ASTM-B85) (UNS A03800) (DIN AlSi9Cu3) Anodized Finish or E Coat (Black) WEAR COLLAR CRES 303 (Stainless Steel) (ASTM-A581) (UNS S30300) (DIN 1.4305) Passivated Finish ACTUATOR Aluminum 2024-T4 BUTTON* (ASTM-B211) (UNS A92024) (DIN AlCuMg2) Anodized Finish (Blue) ACTUATOR Aluminum 2024-T4 BUTTON * (ASTM-B211) (UNS A92024) (DIN AlCuMg2) (Aluminum Dome) Anodized Finish (Clear) SPRING CRES 302 (Stainless Steel) (Internal) (ASTM-A313) (UNS S30200) (DIN 1.4300) Passivated Finish BALLS CRES 440C (Stainless Steel) (QQ-S-763) (UNS S44004) (DIN 1.4125) Heat Treated -RC (58-62) Passivated Finish BAIL CRES 302 (Stainless Steel) (Ring Handle) (ASTM-A313) (UNS S30200) (DIN 1.4300) Passivated Finish SPLIT RING CRES 302 (Stainless Steel) (ASTM-A313) (UNS S30200) (DIN 1.4300) Passivated Finish SHANK – Inch 300 SERIES SS PINS CRES 304 (Stainless Steel) (AMS-5639) (UNS S530400) (DIN 1.4301) or CRES 303 (Stainless Steel) (AMS-5640) (UNS S30300) (DIN 1.4305) Tensile Strength = 73,000 lb/in2 Minimum Passivated Finish ———— CRES 17-4PH (Stainless Steel) (AMS-5643) (UNS S17400) (DIN 1.4542) Heat Treated Min. RC-40 Tensile Strength = 190,000 lb/in2 Minimum Passivated Finish Aluminum 2024-T4 (ASTM-B211) (UNS A92024) (DIN AlCuMg2) Anodized Finish (Black) CRES 303 Stainless Steel (ASTM-A581) (UNS S30300) (DIN 1.4305) Passivated Finish Aluminum 380 Die Cast (ASTM-B85) (UNS A03800) (DIN AlSi9Cu3) Anodized Finish or E Coat (Black) CRES 303 (Stainless Steel) (ASTM-A581) (UNS S30300) (DIN 1.4305) Passivated Finish Aluminum 2024-T4 (ASTM-B211) (UNS A92024) (DIN AlCuMg2) Anodized Finish (Blue) Aluminum 2024-T4 (ASTM-B211) (UNS A92024) (DIN AlCuMg2) Anodized Finish (Clear) CRES 302 (Stainless Steel) (ASTM-A313) (UNS S30200) (DIN 1.4300) Passivated Finish CRES 440C (Stainless Steel) (QQ-S-763) (UNS S44004) (DIN 1.4125) Heat Treated -RC (58-62) Passivated Finish CRES 302 (Stainless Steel) (ASTM-A313) (UNS S30200) (DIN 1.4300) Passivated Finish CRES 302 (Stainless Steel) (ASTM-A313) (UNS S30200) (DIN 1.4300) Passivated Finish STEEL ALLOY 4130 PINS 4130 (Alloy Steel) (AMS-6370) (UNS G41300) (DIN 1.7218) Heat Treated RC36-40 Tensile Strength = 160,000 to 180,000 lb/in2 Cadmium Plate Finish 4130 (Alloy Steel) (AMS-6370) (UNS G41300) (DIN 1.7218) Heat Treated RC36-40 Tensile Strength = 160,000 to 180,000 lb/in2 Clear Zinc–Nickel Plate Finish CRES 17-4PH (Stainless Steel) (AMS-5643) (UNS S17400) (DIN 1.4542) Heat Treated Min. RC-40 Tensile Strength = 190,000 lb/in2 Minimum Passivated Finish Aluminum 2024-T4 (ASTM-B211) (UNS A92024) (DIN AlCuMg2) Anodized Finish (Black) ———— Aluminum 380 Die Cast (ASTM-B85) (UNS A03800) (DIN AlSi9Cu3) Anodized Finish or E Coat (Black) CRES 303 (Stainless Steel) (ASTM-A581) (UNS S30300) (DIN 1.4305) Passivated Finish Aluminum 2024-T4 (ASTM-B211) (UNS A92024) (DIN AlCuMg2) Anodized Finish (Blue) Aluminum 2024-T4 (ASTM-B211) (UNS A92024) (DIN AlCuMg2) Anodized Finish (Clear) CRES 302 (Stainless Steel) (ASTM-A313) (UNS S30200) (DIN 1.4300) Passivated Finish CRES 440C (Stainless Steel) (QQ-S-763) (UNS S44004) (DIN 1.4125) Heat Treated -RC (58-62) Passivated Finish CRES 302 (Stainless Steel) (ASTM-A313) (UNS S30200) (DIN 1.4300) Passivated Finish CRES 302 (Stainless Steel) (ASTM-A313) (UNS S30200) (DIN 1.4300) Passivated Finish *Note: When a stainless Ring, Button, Nautical Recessed, or Domed handle is specified, the actuator button will be made from CRES-303 (Stainless). Hole Size / Performance Data Inch Dia Metric Hole Size Calculated Double Shear (lbs) Fixtureworks | 33792 Doreka Dr., Fraser MI 48026 | Phone: 586-294-1188 | Fax: 586-294-4843

 Open the catalog to page 1

All Fixtureworks catalogs and technical brochures

  1. Sliding Locks
    Sliding Locks

    41  Pages

  2. Work Supports
    Work Supports

    24  Pages

  3. Flex Locators
    Flex Locators

    41  Pages

  4. Spring Clamps
    Spring Clamps

    24  Pages

  5. Side Clamps
    Side Clamps

    27  Pages

  6. One Touch Fasteners
    One Touch Fasteners

    138  Pages

  7. One Touch Clamps
    One Touch Clamps

    68  Pages

  8. QCTH / QCTHL / QCTHH
    QCTH / QCTHL / QCTHH

    4  Pages

  9. QCSL
    QCSL

    4  Pages

  10. QSC
    QSC

    2  Pages

  11. QCPC
    QCPC

    4  Pages

  12. QCTH-N / QCTH-B
    QCTH-N / QCTH-B

    2  Pages

  13. Fixtureworks catalog
    Fixtureworks catalog

    572  Pages

  14. WORKHOLDING & POSITIONING GRIPPERS
    WORKHOLDING & POSITIONING GRIPPERS

    74  Pages

  15. SUPPORTS, STOPS & SETUP ACCESSORIES
    SUPPORTS, STOPS & SETUP ACCESSORIES

    50  Pages

  16. ROLLERS
    ROLLERS

    30  Pages

  17. INDEXING PLUNGERS
    INDEXING PLUNGERS

    13  Pages

  18. CMM_Inspection
    CMM_Inspection

    10  Pages

  19. BUMPERS
    BUMPERS

    14  Pages

  20. TRIMAX VISES
    TRIMAX VISES

    40  Pages

  21. SPRING & BALL PLUNGERS
    SPRING & BALL PLUNGERS

    16  Pages

  22. PRECISION TOOLING PLATES, BLOCKS & LOCATORS
    PRECISION TOOLING PLATES, BLOCKS & LOCATORS

    41  Pages

  23. KNOBS
    KNOBS

    27  Pages

  24. ADJUSTABLE HANDLES & LEVERS
    ADJUSTABLE HANDLES & LEVERS

    37  Pages

  25. CLAMPS
    CLAMPS

    72  Pages

  26. QUICK RELEASE BALL LOCK PINS
    QUICK RELEASE BALL LOCK PINS

    62  Pages

  27. Pull Handles
    Pull Handles

    9  Pages

  28. MACHINE ACCESSORIES
    MACHINE ACCESSORIES

    8  Pages

  29. HAND WHEELS & CRANK HANDLES
    HAND WHEELS & CRANK HANDLES

    25  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.