*mydirectindustry

QCPC

Product catalog summary

Overview: The document provides technical specifications and usage instructions for QCPC Pin Holding Clamps, designed for space-saving applications. It includes details on materials, dimensions, clamping force, and installation procedures.

Specifications:

Materials: The clamps are made from various materials including S45C steel, polyamide, and stainless steel (SUS440C, SUS304WPB, SCS13, SUS303).
Types: There are three types of clamps: QCPC (Plastic Knob), QCPC-S (Metal Knob), and QCPC-SUS (Stainless Steel).
Part Numbers and Weights: The document lists part numbers and corresponding weights for each type, e.g., QCPC0625-10 weighs 35g, QCPC0625-10S weighs 45g.
Dimensions: Detailed dimensions are provided for different sizes, including proper plate thickness, clamping force, and suitable clamping pins.

Technical Information:

Heat Resistance: QCPC clamps can withstand temperatures up to 130°C, while QCPC-S and QCPC-SUS can withstand up to 200°C.
Strength: Shear strength and tensile strength values are provided for different sizes, e.g., QCPC0625-10 has a shear strength of 1100N and tensile strength of 250N.

Usage Instructions:

To use, position the knob at "OFF," place the clamp over the pin, and turn the knob to "ON" for clamping. Reverse the steps to unclamp.

Installation:

Instructions include proper plate thickness and dimensions for installation, with figures illustrating the setup.

Accuracy:

Machining accuracy and repeatability are specified, with a repeatability of ±0.25. For higher accuracy, locating pins are recommended.

Notes:

Rotation of the subplate or base plate can cause unclamping if only one pair of clamp and pin is used. A stop should be prepared in such applications.

Catalog excerpts

QCPC Stainless Steel Electroless Nickel Plated Stainless Steel Electroless Nickel Plated Type QCPC ★Key Point Pin clamping design enables space-saving application. Polyamide S45C steel glass-fiber reinforced SUS440C Electroless stainless steel SUS304WPB Black nickel plated Quenched and stainless steel SCS13 stainless steel tempered Equivalent to SUS304 SUS303 stainless steel Proper Clamping Pins QCPC Plastic Knob Part Number Size QCPC QCPC-S QCPC-SUS Clamping Pins QCPC-S Metal Knob QCPC-SUS Stainless Steel Part Number Part Number Supplied With ・ CPC QCPC-S QCPC-SUS 0625-10 Q 3 of socket-head cap screws(stainless steel), M2×0.4-5L ・ CPC QCPC-S

Open the catalog to page 1

Technical Information ngle dge A Spring Plate Shear Strength Clamping Force Tensile Strength Heatresistant Shear Strength Tensile Strength Temperature℃ N N Four balls hold the Clamping Pin to pull the plate for clamping. Snap! Clamping 1. nsure that the knob is positioned at the "OFF" mark and E put Pin Holding Clamp over the Clamping Pin. 2. urn the knob to the "ON" mark for clamping. T Note: For unclamping, follow back these steps. Application Example Changes of guides around star wheels PIN HOLDING CLAMP QCPC0625-10-SUS

Open the catalog to page 2

Application Example Changes of static electricity removal brush CLAMPING PIN QCPC0625-M4-SUS How To Install Equally Spaced Equally Spaced Proper Plate Thickness QCPC-S QCPC-SUS 6 Over 6, 10 or less 6 Over 6, 14 or less

Open the catalog to page 3

■Machining Accuracy Subplate Locating Pin Base plate Spacing tolerance on both the subplate and the base plate should be ±0.1. Note Rotation of either sub plate or base plate can get Pin Holding Clamp unclamped, when one pair of the clamp and the clamping pin is used. Prepare a stop in such application. For higher accurate locating, use l

Open the catalog to page 4

QCPC

QCPC

Catalog excerpts

All Fixtureworks catalogs and technical brochures