Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Fixtureworks
  3. PRECISION TOOLING PLATES, BLOCKS & LOCATORS

PRECISION TOOLING PLATES, BLOCKS & LOCATORS

PRECISION TOOLING PLATES, BLOCKS & LOCATORS
1 / 41 PagesView full catalog

PRECISION TOOLING PLATES, BLOCKS & LOCATORS

Product catalog summary
Precision Tooling Plates, Blocks & Locators Overview
This document provides detailed specifications and descriptions of precision tooling components essential for machining and workholding applications.
Grid Plates & Blocks
Available in various configurations, these are made from FC250 or FC300 cast iron, with SUJ2 steel bushings and SAE-1045 alloy steel thread inserts. They ensure precise alignment with a consistent MTP hole spacing of 50mm +/-0.02.
Riser Blocks
Designed to elevate workpieces, these blocks share material specifications with grid plates and are available in various dimensions.
Compact Riser Blocks
Smaller versions of riser blocks, suitable for applications requiring less elevation.
Two-Sided Grid Blocks
Provide dual-sided grid patterns for versatile workholding, maintaining the same material standards as other grid components.
Material and Construction
Components are made from high-quality materials like FC250/FC300 cast iron, SUJ2 steel, and SAE-1045 alloy steel, chosen for strength and durability.
Tolerance and Specifications
F7 and G6 tolerance specifications ensure precise engineering standards. Protection plugs and eyebolts are included for safety.
Conclusion
This document is a comprehensive guide for selecting precision tooling plates, blocks, and locators, providing essential specifications for machining applications.
Specifications
  • Metal Protection Plugs: Designed to keep chips and dirt out of unused MTP holes, made from zinc die cast.
  • Four-Sided Grid Blocks: Made from FC300 cast iron with SUJ2 steel bushings and SAE-1045 alloy steel thread inserts.
  • Blank Angle Blocks: Constructed from FC300 cast iron, available in various sizes.
  • Square T-Slot Plates: Made from FC250 cast iron, precision ground with specific mounting hole configurations.
Procedures and Recommendations
  • Refer to page 561 for F7 tolerance specifications and MTP hole construction details.
  • Ensure proper alignment using specified screws and locating strips.
Key Data from Tables
  • Components are listed with specific dimensions, thread sizes, and mounting holes.
  • Part numbers indicate size and thread specifications.
Critical Information
  • Material specifications are crucial for durability and application.
  • Dimensional tolerances ensure compatibility with existing systems.
Flex Fixturing System
Allows fast fixture changes with Flex Base Plates, Flex Fixture Plates, and Flex Angle Plates. Tapered pins ensure precise alignment.
Recommendations
Do not grind the bottom of Flex Blank Fixture Plates to maintain fit accuracy. Custom configurations are available.
Key Features
Flexibility and repeatability in mounting fixtures on different machines, enhancing efficiency.
Flex Locators
Components designed for precise positioning, made from SAE-1045 and SAE-4140 alloy steel. Available in various sizes and configurations.
Procedures
Installation and tightening procedures are outlined to maintain locating repeatability within 10 microns.
Standards and Tolerances
References specific tolerance standards like F7, g6, and H7.
Recommendations
Use specified receiver bushings and protective covers to prevent contamination.
Key Features
Compact design with quick changeover and efficient locating through tapered design.
Pneumatic Clamping Systems
Designed for precise positioning and repeatability, using air pressure for high repeatability.
APS Zero-Point Locating System
Reduces setup times by allowing positioning and clamping in one operation, with high repeatability accuracy.
Technical Specifications
Detailed measurements and tolerances for each component, ensuring precise application.
Modular Tooling Columns
Designed for rigidity and adaptability, using the SpeedLoc precision mounting system.
Fixture Plates
Pre-machined for fast assembly, compatible with ModLoc tooling columns.
Key Specifications
  • Aluminum and steel options for columns and plates.
  • SpeedLoc system for precision mounting.
SpeedLoc Precision Locating & Mounting System
Includes locators, receivers, and bushings for fast setup changes, with high clamping strength.
Common Applications
Used in CNC machines, palletized fixtures, and other industrial applications.
Precision Locating & Mounting System
Components designed to enhance speed and precision in machining applications.
Flush Mount Locators
Provide secure and precise fit with maximum holding force.
Thread-In Receivers
Offer higher pull-out strengths and easier installation.
Universal Bolt-In Receivers
Interchangeable with competitive systems, easy installation.
Material and Heat Treatment
Components made from AISI-4340 steel, heat-treated for durability.
Stepped Liner Bushings
Used with flush mount locators to maintain a flush work surface.
Standard and Headless Liner Bushings
Essential for maintaining accuracy and longevity of machining systems.
Specifications
Dimensions provided with a tolerance of +/-0.005 inches.
Materials and Hardness
Made from AISI-1144 alloy steel, hardened for durability.
Application Recommendations
Use only two bushings to prevent binding and alignment issues.
See more

Catalog excerpts

PRECISION TOOLING PLATES, BLOCKS & LOCATORS-1

PRECISION TOOLING PLATES, BLOCKS & LOCATORS Manual Clamps 9 Precision Tooling Plates, Blocks & Locators 189 Quick Release Ball Lock Pins & Fasteners 315 Spring & Ball Plungers 377 Adjustable Levers & Handles 407 Hand Wheels & Crank Handles 483 Machine Accessories 509 T-SLOT PLATES & BLOCKS FLEX LOCATORS PRECISION TOOLING PLATES, BLOCKS & LOCATORS MODLOC TOOLING COLUMNS SPEEDLOC PRECISION LOCATORS

 Open the catalog to page 1
PRECISION TOOLING PLATES, BLOCKS & LOCATORS-2

RISER BLOCKS The body is made from FC300 cast iron - annealed and precision ground. The alignment bushings are made from SUJ2 steel. The thread inserts are made from SAE-1045 alloy steel and heat treated. MTP hole spacing is 50mm +/-0.02. Includes protection plugs. Locate on tooling plate or block using BJ700 locating screws. See page 561 for MTP hole construction. (F7) A +/-.02 +/-.02 A Thread B C D E No. of No. of Use Locating Part #mmmmmmmmmmmmMTP Holes Mounting HolesScrew BJ090-1621-12 12 M12X1.75 12160 210 1481510BJ700-12065 See page 561 for F7 tolerance...

 Open the catalog to page 2
PRECISION TOOLING PLATES, BLOCKS & LOCATORS-3

RECTANGULAR GRID PLATES For M16 Socket Head Cap Screws For M16 Socket Head Cap Screws For M16 Socket Head Cap Screws For M16 Socket Head Cap Screws The body is made from FC250 cast iron – annealed and precision ground. The alignment bushings are made from SUJ2 steel. The thread inserts are made from SAE-1045 alloy steel and heat treated. MTP hole spacing is 50mm +/-0.02. Includes protection plugs and eyebolts. Each MTP hole is lettered and numbered for addressing holes. See page 561 for MTP hole construction. See page 561 for F7 and G6 tolerance specifications. Fixtureworks | 33792 Doreka Dr.,...

 Open the catalog to page 3
PRECISION TOOLING PLATES, BLOCKS & LOCATORS-4

SQUARE GRID PLATES The body is made from FC250 cast iron - annealed and precision ground. The alignment bushings are made from SUJ2 steel. The thread inserts are made from SAE-1045 alloy steel and heat treated. MTP hole spacing is 50mm +/-0.02. Includes protection plugs and eyebolts. Each MTP hole is lettered and numbered for addressing holes. See page 561 for MTP hole construction. (F7) A +/-.02 +/-.04 A Thread B C D E F G H Number of Number of Part #mmmm mm mm mm mm_mmmmmm MTP Holes Mounting Holes See page 561 for F7 tolerance specifications. The body is made from FC300 cast...

 Open the catalog to page 4
PRECISION TOOLING PLATES, BLOCKS & LOCATORS-5

The body is made from FC300 cast iron - annealed and precision machined. The alignment bushings are made from SUJ2 steel. The thread inserts are made from SAE-1045 alloy steel and heat treated. MTP hole spacing is 50mm +/-0.02. Includes protection plugs and eyebolts. Each MTP hole is lettered and numbered for addressing holes. See page 561 for MTP hole construction. (F7) A +/-.04 +/-.04 +/-.04 A Thread B C D E F G H J K L M Number of No. of Part #mm_mm mm mm mm mm mm mm mm mm mm mm mm MTP Holes Mounting Holes See page 561 for F7 tolerance specifications. Fixtureworks I 33792 Doreka...

 Open the catalog to page 5
PRECISION TOOLING PLATES, BLOCKS & LOCATORS-6

i&imAoFOUR-SIDED GRID BLOCKS The body is made from FC300 cast iron - annealed and precision machined. The alignment bushings are made from SUJ2 steel. The thread inserts are made from SAE-1045 alloy steel and heat treated. MTP hole spacing is 50mm +/-0.02. Includes protection plugs and eyebolts. Each MTP hole is lettered and numbered for addressing holes. See page 561 for MTP hole construction. (F7) A +/-.04 +/-.04 +/-.04 A Thread B C D E F G H J K L Number of No. of Part #mmmm_mm_mm_mmmm_mm mm_mm mm_mm mm MTP Holes Mounting Holes See page 561 for F7 tolerance specifications....

 Open the catalog to page 6
PRECISION TOOLING PLATES, BLOCKS & LOCATORS-7

BLANK ANGLE BLOCKS The body is made from FC300 cast iron - annealed and semi-finish machined. +/-.2 A B C D E F G H J K L No. of Part #_mm mm mm mm mm mm mm mm mm mm mm Mounting Holes BLANK TWO-SIDED BLOCKS The body is made from FC300 cast iron - annealed and semi-finish machined. +/-.2 +/-.2 A B C D E F G H J K No. of Part #_mm mm mm mm mm mm mm mm mm mm Mounting Holes Fixtureworks I 33792 Doreka Dr., Fraser MI 48026 I Phone: 586-294-1188 I Fax: 586-294-4843 I www.fixtureworks.net

 Open the catalog to page 7
PRECISION TOOLING PLATES, BLOCKS & LOCATORS-8

BLANK FOUR-SIDED BLOCKS The body is made from FC300 cast iron - annealed and semi-finish machined. Part #_mm mm mm mm mm mm mm mm mm Mounting Holes SQUARE T-SLOT PLATES The body is made from FC250 cast iron - annealed and precision ground. Eye bolts included. +/-0.02 +/-0.04 +/-0.04 +/-0.04 +/-0.04 # of Pallet Size A B C D E F G H J K L M Mounting Part #_mm_mm mm mm mm mm mm mm mm mm mm mm mm Holes Fixtureworks I 33792 Doreka Dr., Fraser MI 48026 I Phone: 586-294-1188 I Fax: 586-294-4843 I www.fixtureworks.net

 Open the catalog to page 8
PRECISION TOOLING PLATES, BLOCKS & LOCATORS-9

The body is made from FC300 cast iron - annealed and precision machined. Each face is machined with 0.5mm deep finishing allowance for extra face finish to your specifications. Eye bolts included. Custom configurations are available. +/-0.2 +/-0.05 +/-0.2 +/-0.05 +/-0.04 # of Pallet Size A B C D E F G H J K L M Mounting Part #mmmm mm mm mm mm mm mm mm mm mm mm mm N Holes Fixtureworks I 33792 Doreka Dr., Fraser MI 48026 I Phone: 586-294-1188 I Fax: 586-294-4843 I www.fixtureworks.net

 Open the catalog to page 9
PRECISION TOOLING PLATES, BLOCKS & LOCATORS-10

i&imAoTWO-SIDED T-SLOT BLOCKS The body is made from FC300 cast iron - annealed and precision machined. Each face is machined with 0.5mm deep finishing allowance for extra face finish to your specifications. Eye bolts included. Custom configurations are available. +/-0.2 +/-0.2 +/-0.05 +/-0.04 # of Pallet Size A B C D E F G H J K L M P Mounting Part #mmmm mm mm mm mm mm mm mm mm mm mm mm N mm Holes Fixtureworks I 33792 Doreka Dr., Fraser MI 48026 I Phone: 586-294-1188 I Fax: 586-294-4843 I www.fixtureworks.net

 Open the catalog to page 10
PRECISION TOOLING PLATES, BLOCKS & LOCATORS-11

FLEX FIXTURING SYSTEM The Flex (Flexible) Quick Change Fixturing System consists of a base plate that can be used with both the fixture plates and angle plates. This system can be used in various configurations to mount the Flex Fixture Plates as shown below. Blank for Dedicated Fixturing Together this system allows for: n n n n Grid for Modular Fixturing Fast and Accurate Fixture Changes Mounting the Same Fixture on Different Machines Machining from Five Sides on One Fixture Quick Fixture Setup Repeatability The two tapered pins on the base plate mate with receiver bushings on the fixture plates...

 Open the catalog to page 11

All Fixtureworks catalogs and technical brochures

  1. Sliding Locks
    Sliding Locks

    41  Pages

  2. Work Supports
    Work Supports

    24  Pages

  3. Flex Locators
    Flex Locators

    41  Pages

  4. Spring Clamps
    Spring Clamps

    24  Pages

  5. Side Clamps
    Side Clamps

    27  Pages

  6. One Touch Fasteners
    One Touch Fasteners

    138  Pages

  7. One Touch Clamps
    One Touch Clamps

    68  Pages

  8. QCTH / QCTHL / QCTHH
    QCTH / QCTHL / QCTHH

    4  Pages

  9. QCSL
    QCSL

    4  Pages

  10. QUICK RELEASE BALL LOCK PINS
    QUICK RELEASE BALL LOCK PINS

    1  Page

  11. QSC
    QSC

    2  Pages

  12. QCPC
    QCPC

    4  Pages

  13. QCTH-N / QCTH-B
    QCTH-N / QCTH-B

    2  Pages

  14. Fixtureworks catalog
    Fixtureworks catalog

    572  Pages

  15. WORKHOLDING & POSITIONING GRIPPERS
    WORKHOLDING & POSITIONING GRIPPERS

    74  Pages

  16. SUPPORTS, STOPS & SETUP ACCESSORIES
    SUPPORTS, STOPS & SETUP ACCESSORIES

    50  Pages

  17. ROLLERS
    ROLLERS

    30  Pages

  18. INDEXING PLUNGERS
    INDEXING PLUNGERS

    13  Pages

  19. CMM_Inspection
    CMM_Inspection

    10  Pages

  20. BUMPERS
    BUMPERS

    14  Pages

  21. TRIMAX VISES
    TRIMAX VISES

    40  Pages

  22. SPRING & BALL PLUNGERS
    SPRING & BALL PLUNGERS

    16  Pages

  23. KNOBS
    KNOBS

    27  Pages

  24. ADJUSTABLE HANDLES & LEVERS
    ADJUSTABLE HANDLES & LEVERS

    37  Pages

  25. CLAMPS
    CLAMPS

    72  Pages

  26. QUICK RELEASE BALL LOCK PINS
    QUICK RELEASE BALL LOCK PINS

    62  Pages

  27. Pull Handles
    Pull Handles

    9  Pages

  28. MACHINE ACCESSORIES
    MACHINE ACCESSORIES

    8  Pages

  29. HAND WHEELS & CRANK HANDLES
    HAND WHEELS & CRANK HANDLES

    25  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.