€&hmo’ fixture works

PNEUMATIC PIN HOLDING CLAMP PNEUMATIC PIN HOLDING CLAMP PNEUMATIC BALLLOCKING CLAMPS PNEUMATIC ID HOLDING CLAMP_ Pricing, ordering and CAD downloads available at fixtureworks.com fixture works

PNEUMATIC PIN HOLDING CLAMP Stainless ★Key Point ->. [ Compact pull down clamp *) The clamping force above is at 0.5 MPa. ^imno fixtureworks Pricing, ordering and CAD downloads available at fixtureworks.com

Spacing tolerance for multiple use should be ±0.1. Repeatability is ±0.2. For higher accurate locating, use locating pins. ^imno fixture marks Pricing, ordering and CAD downloads available at fixtureworks.com

PNEUMATIC PIN HOLDING CLAMP R Stainless Wedge ★Key Point -[ Double-acting pull down clamp IT) ^imno fixtureuuorks Pricing, ordering and CAD downloads available at fixtureworks.com 1 The clamping force above is at 0.5 MPa. Inner spring provides clamping without air supply.

Performance Curve ■The piston goes up by air supply from clamping port and the balls move toward the center to pull down the clamping pin. ■The wedge clamping prevents the plate from lifting up. ■Inner spring keeps clamping without air supply. ■ Machining Accuracy Spacing tolerance for multiple use should be ±0.1. Pricing, ordering and CAD downloads available at fixtureworks.com ^imno fixtureinorks

SUS630 stainless steel Precipitation hardened Note: Spacing tolerance for multiple use should be ±0.1. Refer to the product pages of clamps for repeatability. Color difference by the hardening treatment does not affect function or quality of the product. HHole Preparation Pricing, ordering and CAD downloads available at fixtureworks.com ®&imno fixture works

PNEUMATIC BALL-LOCKING CLAMPS Stainless (Spring Clamping/Single Acting) (Pneumatic Clamping/Single Acting) Two clamping types are available. (Spring Clamping/Single Acting) (Pneumatic Clamping/Single Acting) Part Number *) The clamping force above is at 0.5 MPa. BALL-LOCK RECEPTACLE IPBLC1023S-SUSI has an identifying line and IPBLC1023A-SUS1 does not. Pricing, ordering and CAD downloads available at fixtureworks.com ^imAO" fixture uu orks

■The shaft pushes out the balls onto the tapered surface of the receptacle to pull down the plate. ■The wedge clamping prevents the plate from lifting up. ■Spring clamping type can keep clamping without air supply. Application Example

■ Machining Accuracy Spacing tolerance for multiple use should be ±0.1. For higher accurate locating, use locating pins. Pricing, ordering and CAD downloads available at fixtureworks.com

BALL-LOCK RECEPTACLE RaUCf Part Number >*$Note: Spacing tolerance for multiple use should be ±0.1. Refer to the product pages of clamps for repeatability. Color difference by the hardening treatment does not affect function or quality of the product. Plate thickness: 6mm to 10mm Plate thickness: over 10mm Order Separately Part Number l&imflo* fixture works Pricing, ordering and CAD downloads available at fixtureworks.com

PNEUMATIC I D HOLDING CLAM PReKST Stainless ★Key Point -s[ Holds the internal diameter ^ Body 2 of socket-head cap screws(stainless steel), M4X0.7-35L -Color difference by the hardening treatment does not affect function or quality of the product. ■ Use clean air by removing moisture and debris with an air dryer and air filter. ■ Impurities in the compressed air can cause malfunction. Pricing, ordering and CAD downloads available at fixtureworks.com

Performance Curve ■ The pulling shaft goes down by air supply from clamping port and the jaws expand to hold the workpiece. ■The clamp makes a line contact with the workpiece at 3 places. Application Example ■ Hole Preparation With M4 Socket-Head Cap Screws (supplied) With M5 Low-Head Cap Screws (customer supplied) (Dimension: head dia. 8.5, head height 3.5) ■ Repeatability Estimated repeatability is ±0.2 (clamping dia. 0 20, without any load) Pricing, ordering and CAD downloads available at fixtureworks.com

Pricing, ordering and CAD downloads available at fixtureworks.com