ۤiffttO fixture works

ONE-TOUCH CLAMPS One-Touch Clamps Reduce Workpiece Setup Time to 1/3! Manual quick clamps for machining fixture Compared to Screwtightening clamps Pneumatic clamps Tool-less Quick Clamping Reduces Workpiece Setup Times! Mechanically designed One-Touch Clamps Simplify Fixture Design. Quick, tool-less clamping results in 1/3 of the workpiece setup time compared to old-style mechanical clamps that require cumbersome tightening of screws. Fixture with one-touch clamps eliminates the need for piping and maintenance, resulting in a reduction in the overall labor cost. One-Touch Clamps provide a workholding...

SWING CLAMPS WITH ADJUSTABLE HANDLE THRUST CLAMPS LOW-PROFILE CAM EDGE CLAMPS ^imno fixtureuuorlcs Pricing, ordering and CAD downloads available at fixtureworks.com

STABLELOCK SWING CLAMPS SWING CLAMPS WITH CAM HANDLE SWING CLAMPS WITH ADJUSTABLE HANDLE MACHINABLE CLAMP ARMS FOR STANDARD SWING CLAMPS RETRACTABLE CLAMPS WITH CAM HANDLE RETRACTABLE CLAMPS WITH ADJUSTABLE HANDLE Side Push Part No. QLRCF Pricing, ordering and CAD downloads available at fixtureworks.com

STABLELOCK THRUST CLAMPS STABLELOCK SIDE CLAMPS LOW-PROFILE CAM EDGE CLAMPS fixture works Pricing, ordering and CAD downloads available at fixtureworks.com

STABLELOCK PULL CLAMPS CLAMPING SCREWS EXTENSION UNITS Part No. QLPDW-RC Push Up CLAMPING SCREWS (Heavy) Part No. QLPDH-M Pricing, ordering and CAD downloads available at fixtureworks.com

Pricing, ordering and CAD downloads fixtureworks.com Pricing, orderingavailable and CADatdownloads available at fixtureworks.com

SWING CLAMPS RrmjJC w 11J (Electroless Nickel Plated) Type Pricing, ordering and CAD downloads available at fixtureworks.com fixture works

Part Number qlswcI (Black oxide finish) Iqlswc-np I (Electroless nickel) *) Clamping height can be adjusted. The parenthesised values denote clamping height range. **) Allowable load to operate the handle. Part Number Handles Push Up Pull Down Side Push ■ How to Change Handle Position -— The dodecagonal socket in the hub of the handle allows changing the handle position by 30'. Dodecagonal Pricing, ordering and CAD downloads available at fixtureworks.com

STABLELOCK SWING CLAMPS RbUC ★Key Point ->.[ Click to confirm consistent clamping ^ Body, Lever Arm Pricing, ordering and CAD downloads available at fixtureworks.com

Pricing, ordering and CAD downloads available at fixtureworks.com

SWING CLAMPS WITH CAM HANDLE RrmjJC w 11J (Black Oxide Finish) (Electroless Nickel Plated) Style Pricing, ordering and CAD downloads available at fixtureworks.com fixture in arks

■ Operation of CW Type (Invert the operation for CCW type.) Pricing, ordering and CAD downloads available at fixtureworks.com

SWING CLAMPS WITH ADJUSTABLE HANDLE RrmjJC w 11J Base/Washer/Clamping Spindle ■Clamp worked by a screw-locking mechanism which allows providing longer clamping stroke and greater clamping force than a cam-locking mechanism. ■Operated by an adjustable handle that allows for flexible handle positioning. fixture works Pricing, ordering and CAD downloads available at fixtureworks.com

*) Clamping height can be adjusted. The parenthesised values denote clamping height range. Part Number **) Studs are bonded with FKF handles. ***) Allowable load to operate the handle. Handles Push Up Pull Down Side Push How To Use Performance Curve ■Turning the handle allows the clamp arm to swing for clamping. SWING CLAMPS FOR TORQUE CONTROL Pricing, ordering and CAD downloads available at fixtureworks.com

SWING CLAMPS (Standard) Body / Shaft fixture works Pricing, ordering and CAD downloads available at fixtureworks.com

***) Allowable load to operate the handle Part Number Note : The handle must be ordered separately. ■ [QLSLl STANDARD HANDLES ■ [QLTlI ADJUSTABLE-TORQUE HANDLES ■Tip Installation Handles Push Up Pull Down Side Push Pricing, ordering and CAD downloads available at fixtureworks.com fixture in orlcs

Technical Infomation ■Allowable Loads in Machining of Workpiece Bottom Performance Curve Load-Setting Distance A The performance curves shown below do not denote the guaranteed performance. Pricing, ordering and CAD downloads available at fixtureworks.com fixture works

Ball Plunger Handles Push Up Pull Down Side Push

MACHINABLE CLAMP ARMS FOR STANDARD SWING CLAMPS RrmjJC w 11J Part Number *) A clamping tip to mount on the end of the clamp arm must not weigh over 10Og. Use within smaller clamping stroke when the clamp arm becomes longer than standard one. ■ Use for |QLSW| clamp arm customization ■Machine to your clamping requirements Machinable Clamp Arms) **) Actual clamping height:33.4 to 34.6 (clamping stroke: 1.2) ***) Actual clamping height:46.1 to 47.9 (clamping stroke: 1.8) fixture works Pricing, ordering and CAD downloads available at fixtureworks.com ■Clamp Arm Length Vs. Strain During Clamping ■Clamp...

Push Down Side Push Pull Down Push Up Handles Pricing, ordering and CAD downloads fixtureworks.com Pricing, orderingavailable and CADatdownloads available at fixtureworks.com

RETRACTABLE CLAMPS WITH CAM HANDLE RrmjJC w 11J Pricing, ordering and CAD downloads available at fixtureworks.com

Pricing, ordering and CAD downloads available at fixtureworks.com

RETRACTABLE CLAMPS WITH ADJUSTABLE HANDLE Body/Spindle Screw clamping mechanism allows for longer clamping stroke and greater clamping force. fixture works Pricing, ordering and CAD downloads available at fixtureworks.com

*) Clamping height can be adjusted. The parenthesised values denote actual clamping height. Part Number ** ) Studs are bonded with FKF handles. ***) Allowable load to operate the handle. Handles Push Up Pull Down Side Push Technical Information Performance Curve Part Number Pricing, ordering and CAD downloads available at fixtureworks.com

THRUST CLAMPS (Vertical) Type Pricing, ordering and CAD downloads available at fixtureworks.com

Part Number QLRCFl(Heavy-Duty) Part Number Feature / Note ■Can be used in both vertical and horizontal clamping applications. ■The horizontal style is also available, (see page for IQLRCI) ■Spring-loaded clamp that provides constant clamping force. ■ Long clamping-bar projection range allows clamping a recessed part. (When using your own clamping bar, ensure that the diameter is finished to a h9 or better tolerance) When a reaction force (F) becomes greater than a clamping force, the clamping bar slides back to get a part undamped. ■ Operation of CW Type (Invert the operation for CCW type.) Unclamping...