€&hmo* fixtureuuorks

NUTRUNNER SWING CLAMPS NUTRUNNER SWING CLAMPS NUTRUNNER PULL CLAMPS NUTRUNNER PULL CLAMP NUTRUNNER WORK SUPPORTS Pricing, ordering and CAD downloads available at fixtureworks.com

Pricing, ordering and CAD downloads available at fixtureworks.com

NUTRUNNER SWING CLAMPS RrmjJC w 11J ★Key Point -s[Excellent rigidity by embedding to the plate Body Counterclockwise Clamping Clockwise Clamping Pricing, ordering and CAD downloads available at fixtureworks.com

Part Number *) To operate with an impact wrench, use less than 50% of the clamping force and allowable tightening torque. Note: The clamp arm can be replaced with a custom one of your own design. Contact us for the dimensions of its mounting section. Note that the clamping force with the custom clamp arm may increase or decrease from the values above. The inside spiral groove allows the clamp arm to swing positively. / Note This clamp can be operated with an impact wrench. Use an impact wrench that can set the torque, as the clamp may be damaged if it is used with the tightening torque exceeding...

Part Number Part Number Recommended Screw Size for Custom Holder ■IPTSW3-121:2 pcs, of Ml 2 ■IPTSW3-161:2 pcs, of Ml 6 Pricing, ordering and CAD downloads available at fixtureworks.com

Pricing, ordering and CAD downloads available at fixtureworks.com

NUTRUNNER SWING CLAMPS RaIIC Body / Clamp-Arm Holder / Hex. Head Feature Pricing, ordering and CAD downloads available at fixtureworks.com fixture works

Part Number BWithout Clamp Arm Part Number Note: The clamp arm can be replaced with a custom one of your own design. Refer to the instruction on our website for the dimensions and details. Note that the clamping force with the custom clamp arm may increase or decrease from the values above. How To Use 1. Unclamping Load a workpiece. Turn the hex. head with the nut runner and the clamp arm swings to the clamping position. The clamp arm moves down vertically for clamping. Secure clamping can be done in a few seconds with the nut runner. This clamp can be operated with an impact wrench. Use an impact...

NUTRUNNER SIDE CLAMPS Body/Jaw/Wedge ★Key Point ->.[ Easy operation with hex head on top ^ Part Number *) To operate with an impact wrench, use less than 50% of the clamping force and allowable tightening torque. Supplied With Pricing, ordering and CAD downloads available at fixtureworks.com fixture works

■ Hex. head for operation is located on the top for easy access of nut runners. ■Grippers can be mounted in the M6 tapped hole on the jaw. Reference The following grippers are applicable to this product. ■fHS^ClROUND GRIPPERS, C'Bored ■fH^ClSQUARE GRIPPERS, C'Bored ■fPCSl POINTED TIP SCREWS ■fRCSl ROUND TIP SCREWS ■ Hex. Head Gripper ■fcTl ROUND GRIPPERS This clamp can be operated with an impact wrench. Use an impact wrench that can set the tightening torque. ■ Ideal for use with a nut runner for automated production line. ■This clamp can be also tightened manually. Pricing, ordering and CAD...

NUTRUNNER PULL CLAMPS ★Key Point ->.[No need for mounting clamping screws. ^ Body Supplied With ') To operate with an impact wrench, use less than 50% of the clamping force and allowable tightening torque. Pricing, ordering and CAD downloads available at fixtureworks.com ^imno" fixture works

The clamping screw integrated with the body clamps the workpiece by pulling in the tapped hole on the workpiece. The minimum rotations required for clamping/unclamping ■|PTPD1-12l: 8 (Thread engagement length 14mm) ■IPTPD1-161: 8 (Thread engagement length 16mm) Note: The number of rotations to be set on the nut runner should have a margin based on the minimum number of rotations above. ■ Machine the risers to align heights and prevent tool interference. ■For machining of the riser, attach the supplied plastic cap to prevent chips and dust from entering the body. 2. Locate the workpiece in position....

■ Ideal for use with a nut runner for automated production line. ■This clamp can be also operated manually. ■Clamping/unclamping can be done simply by mounting a workpiece and turning the hex. head. T-Handle Socket Wrench This clamp can also be clamped/unclamped manually using a T-handle socket wrench. For manual unclamping, turn the wrench until the clamp clicks, and the clamping screw releases a workpiece. Pricing, ordering and CAD downloads available at fixtureworks.com

H Mounting Hole Dimension ■For using multiple pull clamps, the spacing tolerance of the central axes should be ±0.05. ■The spacing tolerance for tapped holes on a workpiece should be ±0.2. ■This clamp can be operated with an impact IPTRC11 EXTENSION UNITS wrench. Use an impact wrench that can set the tightening torque. ■Clamping screws are available as maintenance parts. Pricing, ordering and CAD downloads available at fixtureworks.com

NUTRUNNER PULL CLAMP RrmjJC w 11J Part Number Options of Operating Tool This clamp can be operated with an impact wrench. Use an impact wrench IPTPD-Ml CLAM PI NG SCREWS that can set the torque, as the clamp may be damaged if it is used with the IPTRC11 EXTENSION UNITS tightening torque exceeding the allowable value for a long period of time. Pricing, ordering and CAD downloads available at fixtureworks.com fixture works

Clamps the workpiece by pulling in the clamping screws mounted on the bottom of the workpiece. This clamp allows the workpiece to be machined from 5 sides. ■ How To Operate Operation from the side with the hex head allows easy tightening of the workpiece. How To Use Ideal for use with a nut runner for automated production line, as well as for use with a power tool for easier operation. This clamp can be also tightened manually. Pricing, ordering and CAD downloads available at fixtureworks.com

CLAMPING SCREWS Part Number Pricing, ordering and CAD downloads available at fixtureworks.com

Pricing, ordering and CAD downloads available at fixtureworks.com

PTNS1 NUTRUNNER WORK SUPPORTS ★Key Point -Prevent workpiece vibration and deflection. Body Part Number Part Number *)To operate with an impact wrench, use less than 50% of the allowable tightening torque and support capacity. 1 of|THP12| Protection Plugs ForTapped Holes iPTNSH6]:2 of parallel pin, 08(h7)x25L 1 of ITHP16lProtection Plugs ForTapped Holes Supplied With Reference ■ITHP121 [THPT61 PROTECTION PLUGS FORTAPPED HOLES ■IPTRC11 EXTENSION UNITS Pricing, ordering and CAD downloads available at fixtureworks.com ^imno fixture works