<®nnno fixtureuuorks Modular Pull Clamping System m

MODULAR PULL CLAMPING SYSTEM New Style of Pull Clamps! The cylindrical body allows machining 5 sides without tool interference! Dual surface contact of the tapered surfaces provides 5 Atm locating repeatability! Simple workholding ! Better Machining Accuracy Lower Fixture Cost Shorter Fixture Preparation Time fixture marks Pricing, ordering and CAD downloads available at fixtureworks.com

Fixture Improvement Pull clamping with screws (Using fixture plate) Quick Fixture Change Quick and precise fixture change No need of mounting holes Full space is available for fixture parts. «km&- Can be used as a universal fixture by standardizing the mounting hole Universal Custom 50mm pitch holes Pricing, ordering and CAD downloads available at fixtureworks.com fixture works

The Modular Pull Clamping System consists of clamping modules and clamping screws. Each module can be coupled to increase the height. Clamping Modules Part Number Low profile, fixed with hexagon socket head cap screws JSL Clamping Module 5 m Locating Repeatability 5p Part Number Flexible type with clamping mechanism on the top and bottom Clamping Module Locating Repeatability Part Number with secket-headcap screws Clamping Module004mm Locating Repeatability Pricing, ordering and CAD downloads available at fixtureworks.com

Clamping Screws Mount to bottom of workpiece to pull it down Machining Area For machining close area to clamping module To avoid tool interferences, raise workpieces with Riser Screws. With Riser Tapered Clamping Screws (Round) For Precise Locating Overall surface is the reference. CP155-L Overall surface is the reference. With Riser Tapered Clamping Screws (Diamond) 5 （Should be used with round type.） For Precise Locating Diagonal surfaces are the references. CP155-D Diagonal surfaces are the references. CP155-DS With Riser Clamping Screws No locating function. CP156 Clamping Operation Install...

CLAMPING MODULES (Single)_ TAPERED CLAMPING SCREWS_ TAPERED CLAMPING SCREWS_ TAPERED RISER SCREWS RISER SCREWS TAPERED BUSHINGS DOUBLE TAPERED CLAMPING PINS LOCATING BUSHINGS Pricing, ordering and CAD downloads available at fixtureworks.com

TAPERED CLAMPING SCREWS CLAMPING SCREWS CLAMPING SCREWS Pricing, ordering and CAD downloads available at fixtureworks.com

CLAMPING MODULES (Flanged) Body Part Number Supplied With ICP150I -08040,1 2063,1 6080 : 2 pcs. of flat washer Allowable Cutting Force & Workpiece Weight of CLAMPING MODULES ■|CP155-HI Tapered Clamping Screws ■ |CP155-D| Tapered Clamping Screws Clamping Screws Tapered Pins ■ ICP155-LS1 Tapered Riser Screws ■ ICP155-DS1 Tapered Riser Screws CP156-S] Riser Screws fixture works Pricing, ordering and CAD downloads available at fixtureworks.com

Part Number Note:The tolerance of dimension "d" forTapered Pin (Standard) should be +J- 1 . Pricing, ordering and CAD downloads available at fixtureworks.com

CLAMPING MODULES (Double) RrmjJC w 11J Part Number Related Product ■ ICP1501 Clamping Modules (Flanged) ■ ICP155-UTapered Clamping Screws ■ ICP1521 Clamping Modules (Single) -ICP155-DI Tapered Clamping Screws ■ ICP1561 Clamping Screws For workpiece raising ■ ICP155-LSl Tapered Riser Screws ■ ICP155-DSl Tapered Riser Screws Allowable Cutting Force & Workpiece Weight of CLAMPING MODULES Pricing, ordering and CAD downloads available at fixtureworks.com

Part Number How To Use ■UselCPI 55-L|Tapered Clamping Screw (Round) for precise locating. ■UselCPI 56lClamping Screw just for fixing. Spacing tolerance for CPI 55-L Tapered Clamping Screws (Accurate) should be ±0.02. *)Spacing tolerance for CPI 56 Clamping Screws should be ±0.2. I Coupling with Other Clamping Modules Can be coupled with each Clamping Module. (Locating Repeatability is 0.2> Clamping Module (Flanged) CPI 50 Clamping Module Clamping Module ITightening Order Tighten the locking screws in order of 1 (Round Tapered Clamping Screw)-* 2(Diamond Tapered Clamping Screw)-*3(Clamping Screw)-*4(Clamping...

CLAMPING MODULES (Single) RrmjJC w 11J Part Number Technical Information Part Number Allowable Cutting Force & Workpiece Weight of CLAMPING MODULES Related Product ■ICP150lClamping Modules (Flanged) -|CP155-L|Tapered Clamping Screws ■|CP151|Clamping Modules (Double) -ICP155-DI Tapered Clamping Screws ^imno fixture works Pricing, ordering and CAD downloads available at fixtureworks.com

■ UseICP1591 Locating Bushing for precise locating. ■Use only hex. socket-head cap screw just for fixing. Part Number Note:Only c'bored hole is required just for fixing. ISpacing Tolerance Spacing tolerance for CPI 59 Locating Bushings should be ±0.02. *) Spacing tolerance for hex. socket-head cap screw should be ±0.1. I Coupling with Other Clamping Modules Can be coupled with each Clamping Module. <Locating Repeatability is 5/x.m> Tightening Order Tighten the locking screws in order of 1 (Round Tapered Clamping Screw)-» 2(Diamond Tapered Clamping Screw)-»3(Clamping Screw)-»4(Clamping Screw)....

TAPERED CLAMPING SCREWS Li Part Number TAPERED CLAMPING SCREWS Li Part Number Pricing, ordering and CAD downloads available at fixtureworks.com ^imno fixture in arks

Round Type ■Can be used for locating I CP1511 Clamping Module (Double). ■ Can be used for locating a workpiece with diamond type. Diamond Type ■Can be used for locating a workpiece with round type. ■Fix the tapered pin of diamond type after deciding the direction. CP1501-06025, I CP1511-06050 orl CP152 I -06032, use 2 pieces of Round Type. ■Application Example ■Coupling of Clamping Module (Single) Round type can be used as a coupling for Clamping Module (Single). CP150 I Clamping Modules (Flanged) CP151I Clamping Modules (Double) CP152 I Clamping Modules (Single) Pricing, ordering and CAD downloads...

SCM435 steel Quenched and tempered Black oxide finished Part Number CLAMPING MODULES How To Use CP151 Clamping Module (Double) on the fixture plate. Tapered Clamping Screws (Round) CP155-L Tapered Clamping Screws (Diamond) CP155-D Tapered Clamping Screws (Round) CP155-L Clamping Modules (Double) CP151 Tapered Clamping Screws (Round) CP155-L Related Product CP150 Clamping Modules (Flanged) CP151 Clamping Modules (Double) CP152 Clamping Modules (Single) CP155-L Tapered Clamping Screws CP155-D Tapered Clamping Screws Pricing, ordering and CAD downloads available at fixturew