*mydirectindustry

Catalogs
Fixtureworks
INDEXING PLUNGERS

INDEXING PLUNGERS

Product catalog summary

Indexing Plungers Overview
Indexing plungers are mechanical components designed to maintain locking positions against lateral forces. They are spring-loaded and can be retracted by pulling the handle, which retracts the plunger pin into the body. Available in both locking and non-locking styles, these components are essential for applications requiring precise positioning and secure locking.

Materials and Construction
Constructed from stainless steel with a natural finish, the plungers feature a ground and hardened plunger pin for durability. They are typically supplied with a jam nut, although versions without jam nuts and non-hardened plungers are available. Screw-in washers facilitate easy installation.

Specifications
The document provides detailed specifications for both inch and metric sizes, including dimensions such as diameter, length, and spring force. Specifications are categorized under non-locking and locking styles, with part numbers provided for each variant.

Applications
These plungers are suitable for applications where precise positioning and secure locking are required, such as in manual clamps, pneumatic workholding, and CMM inspection fixturing.

Key Features

Spring-loaded mechanism for easy retraction.
Available in various sizes and styles to suit different applications.
Constructed from durable stainless steel.
Options for both locking and non-locking configurations.

Contact Information
For more information, Fixtureworks can be contacted at their Fraser, MI location, with phone and fax numbers provided, as well as their website.

Product Variants
The document includes both inch and metric variants, with specific part numbers for each configuration, allowing for precise selection based on application requirements.

Usage Instructions
To operate, pulling up on the handle retracts the plunger pin into the body. The handle end is threaded, allowing users to attach their own grip or use with air cylinders or cables. For L handle plungers, turning the handle while retracted locks the plunger in place.

Spring Force
The document provides initial and final spring force values for each plunger, indicating the force required to retract and extend the plunger pin.

Adjustable Clamping Pins and Pull Pins
Adjustable clamping pins allow for quick clamping and release, with adjustable plunger depth. Pull pins consist of a housing and plunger assembly, designed for quick retraction and engagement. They are available in various materials and finishes, suitable for quick adjustments and secure fastening in industrial setups.

Catalog excerpts

INDEXING PLUNGERS Manual Clamps 9 Precision Tooling Plates, Blocks & Locators 189 Quick Release Ball Lock Pins & Fasteners 315 Spring & Ball Plungers 377 Adjustable Levers & Handles 407 Hand Wheels & Crank Handles 483 Machine Accessories 509 INDEXING PLUNGERS PALM GRIP

Open the catalog to page 1

■"PI* HAND RETRACTABLE PLUNGERS Stainless Pull Knob I Stainless Steel I Inch & Metric Non-Locking Style These spring loaded hand retractable plungers are used to prevent any change in locking position due to lateral force. Pulling up on the handle retracts the plunger pin into the body. The locking style allows the plunger to remain in the retracted position. The body and handle are made from stainless steel with natural finish. The plunger pin is ground and hardened. They are supplied with a jam nut. Plungers without jam nuts and non-hardened plungers are available. Non-Locking Style Locking...

Open the catalog to page 2

HAND RETRACTABLE PLUNGERS These spring loaded hand retractable plungers are used to prevent any change in locking position due to lateral force. Pulling up on the handle retracts the plunger pin into the body. The handle and plunger pin are made from stainless steel with natural finish. The plunger pin is ground and hardened. Plungers without jam nuts and non-hardened plungers are available. Screw-in washers are available to easily install the plungers. Part #DD1 D2 L LI L2 H SW F X 30° Initial Lbs. Final Lbs. Part # 03093-002903AJ .118 (3mm) 1/4-28 .55 1.36 .67 .55 .14 7/16 .0311.02203094-99...

Open the catalog to page 3

HAND RETRACTABLE PLUNGERS Non-Locking Style Locking Style These spring loaded hand retractable plungers are used to prevent any change in locking position due to lateral force. Pulling up on the handle retracts the plunger pin into the body. The locking style allows the plunger to remain in the retracted position. The body is available in steel with black oxide finish or stainless steel with natural finish. The plunger pin is ground and hardened and are supplied with a jam nut. The Novo-Grip knob is made from black plastic. Plungers without jam nuts and non-hardened plungers are available....

Open the catalog to page 4

HAND RETRACTABLE PLUNGERS Non-Locking Style Locking Style These spring loaded hand retractable plungers are used to prevent any change in locking position due to lateral force. Pulling up on the handle retracts the plunger pin into the body. The locking style allows the plunger to remain in the retracted position. The body is available in steel with black oxide finish or stainless steel with natural finish. The plunger pin is ground and hardened and are supplied with a jam nut. The knob is made from black plastic. Plungers without jam nuts and non-hardened plungers are available. Non-Locking...

Open the catalog to page 5

HAND RETRACTABLE PLUNGERS These spring loaded hand retractable plungers are used to prevent any change in locking position due to lateral force. Pulling up on the handle retracts the plunger pin into the body. The locking style allows the plunger to remain in the retracted position. The short body allows the plungers to be used in confined spaces. The body is available in steel with black oxide finish or stainless steel with natural finish. The plunger pin on the steel versions is ground and hardened. Plungers are supplied with a jam nut. The knob is made from black plastic. Plungers without...

Open the catalog to page 6

Screw-in Washer These spring loaded hand retractable plungers are used to prevent any change in locking position due to lateral force. Pulling up on the handle retracts the plunger pin into the body. The body is available in steel with black oxide finish or stainless steel with natural finish. The plunger pin is ground and hardened and are supplied with a jam nut. Screw-in washers are available to easily install the plungers. The knob is made from black thermoplastic. Plungers without jam nuts and non-hardened plungers are available. Engaged Disengaged To lockout the spring loaded hand retractable...

Open the catalog to page 7

HAND RETRACTABLE PLUNGERS These spring loaded hand retractable plungers are used to prevent any change in locking position due to lateral force. Pulling up on the threaded end retracts the plunger pin into the body. The handle end is threaded for users to attach their own grip or for use with air cylinders, cables, etc. The body is available in steel with black oxide finish or stainless steel with natural finish. The plunger pin is ground and hardened and are supplied with a jam nut. Plungers without jam nuts and non-hardened plungers are available. Part #Part#D D1 D2 L L1 L2 L3 L4 H SW1 SW2...

Open the catalog to page 8

HAND RETRACTABLE PLUNGERS ft These spring loaded hand retractable plungers are used to prevent any change in locking position due to lateral force. Pulling up on the L handle retracts the plunger pin into the body. By turning the handle while in the retracted position, the plunger can be locked in the retracted position. The body and plunger are made from alloy steel with blue chromate finish. SPRING FORCE F1 F2 Max Torque Initial Lbs. Final Lbs._Ft/Lbs. mm_mm mm mm mm mm mm mm mm mm mm_Initial Lbs. Final Lbs._Ft/Lbs. Fixtureworks I 33792 Doreka Dr., Fraser MI 48026 I Phone: 586-294-1188 I...

Open the catalog to page 9

HAND RETRACTABLE PLUNGERS These hand retractable plungers are used for positioning, locating and fastening, without the use of tools, in a wide range of applications. As the handle is turned 180 degrees on the cam of the body, the plunger is retracted into the housing. There is a groove on the top of the cam that locks the plunger into the retracted position. They are available in steel or stainless steel. The steel style has a ground and hardened plunger with a black oxide finish and a powder coated handle. The stainless style has a ground and non-hardened plunger with a natural finish. The...

Open the catalog to page 10

HAND RETRACTABLE PLUNGERS Part #Part #mmmmmm mm mm mm mm mm mm mm mmInitial Lbs. Final Lbs. 03099-070410 03099-10504104 M10X1.5 10 38 25 20 9 3 6 17 11.83.2 Fraser MI 48026 I Phone: 586-294-1188 I Fax: 586-294-4843 I www.fixtureworks.net

Open the catalog to page 11

INDEXING PLUNGERS

INDEXING PLUNGERS

Catalog excerpts

All Fixtureworks catalogs and technical brochures