CMM_Inspection
10Pages

PLATES COLUMNS CMM INSPECTION FIXTURING Precision Tooling Plates, Blocks & Locators 189 Quick Release Ball Lock Pins & Fasteners 315 Spring & Ball Plungers 377 Adjustable Levers & Handles 407 Hand Wheels & Crank Handles 483 Machine Accessories 509

ItemPart #DescriptionQty 1F018-0124Spring Clamp - 1.5" Length3_ 2F018-0137Spring Clamp - 2.3'' Length3_ 3F010-0103Adjustable Positioner Plate - 3'' Length2_ 4F019-0201Delrin® Height Adjuster1_ 5F021-0114Support Tip - Delrin® Cone3_ 6F017-0108Pin Rest - 1/2'' Diameter x 1/2'' Height3_ 7F017-0112Pin Rest - 3/4'' Diameter x 1/2'' Height3_ 8F019-0412Standoff - Steel - 1/2'' Diameter x 3/4'' Height 3 9F019-0416Standoff - Steel - 1/2'' Diameter x 1” Height 6 Basic CMM clamp set with 1/4-20 thread size components. The kit is recommended for use with plastic, aluminum and steel parts....

The plastic clamping set is intended for CMM inspection and gaging applications. Plastic helps to prevent damage to delicate or painted workpieces. The hand-tightened clamps allow the user to apply force while minimizing the distortion of a pliable work piece. The clamps and rest feet are made from non-marring Delrin®. The studs, coupling nuts and washers are made from steel with a black oxide finish. Not for use in machining applications. Includes a metal holder to keep the set components together. Part #_Thread_ Magnetic fixturing set with 1/4-20 thread size components. The kit is...

FIXTURE COLUMN - SINGLE ROW - ALUMINUM Aluminum fixture columns are typically used in vertical CMM fixturing applications where large or long parts need to be oriented in an upright position. Column holes are equally spaced, and each hole is numbered and lettered for easy addressing. Knurled knob studs are used to fasten the base to a fixture plate. The column is made from 6061 aluminum with a clear anodized finish. The base is made from steel with a black oxide finish. Center-Center Bolt Size FIXTURE COLUMN - DOUBLE ROW - ALUMINUM Aluminum fixture columns are typically used in vertical...

The mini articulating arm provides for a wide range of mounting positions. It rotates 360 degrees, pivots up and down, and extends and retracts to accommodate the workpiece. Made from steel with black oxide finish. Tip made from non-marring Delrin®. SUPPORT TIPS - DELRIN® CONE Cone-shaped support tips provide support to cylindrical or curved work pieces during inspection. The non-marring Delrin® material is ideal for use with finished parts. Adapts threads between 1/4-20 and 5/16-18. Made from mild carbon steel with a black oxide finish. The pin rest serves as a resting point and side stop...

STANDOFFS - STEEL The standoff functions as a resting point to elevate workpieces during inspection. It is made from mild carbon steel with a black oxide finish. HEIGHT ADJUSTER - DELRIN® The Delrin® height adjuster fits over a 1/2" standoff and allows for fine adjustment. Locks into place by tightening the knurled knob. Fraser MI 48026 I Phone: 586-294-1188 I Fax: 586-294-4843 I www.fixtureworks.net

Spring clamps provide light-pressure clamping with limited deflection. They are actuated and released with the press of a finger. The rubber-tipped styles offer added protection against workpiece marring. The post has a 1/4-20 thread is made from 6061 aluminum with a clear anodized finish. Spring clamps are made from 7075 aluminum with a blue anodized finish. Part #T D L L1BB1 H H1 Tip Coating The small toggle clamp holds parts during inspection. The clamp includes an adjustable base for exact positioning and alignment. The plate is secured in place using a knurled knob with a 1/4-20...

ADJUSTABLE POSITIONER PLATES Adjustable positioner plates allow for exact placement of fixturing supports and positioning elements on a fixture plate when the holes in the standard grid patterns do not provide ideal placement. Positioner plates include a knurled knob with a 1/4-20 threaded stud to lock it in place. Made from mild carbon steel with a black oxide finish. Part #T D L L1 L2 L3 L4 W W1 H H1 E x 45° VARIABLE ANGLE BALL POSITIONER The positioner pivots to approximately 45 degrees for a wide range of angled positioning. Tighten the collar to lock...

STANDOFF ADAPTERS - STEEL Adapts threads between 1/4-20 and 5/16-18. Made from mild carbon steel with a black oxide finish. The pin rest serves as a resting point and side stop for locating and elevating parts during inspection. Made from mild carbon steel with a black oxide finish. Magnetic rest pads are used to position and hold steel or iron parts for inspection. The alnico magnet is pressed into body with brass sleeve. Body made from mild carbon steel with black oxide finish. +/-.005 Part #T D D1 L H The magnetic pin rest is used to position and hold steel or iron parts for...

The magnetic V-support is used to hold and support cylindrical steel or iron parts for inspection. Delrin® alignment holders are available separately. Made from mild carbon steel with black oxide finish. Holding Capacity Part #_T D D1 L H H1 V Diameter Use Holder HOLDERS FOR MAGNETIC V-SUPPORTS - DELRIN® The Delrin® holder is used to align and lock a magnetic V-support. V-supports cradle cylindrical parts during inspection. Part #_T D D1 D2 L L1 H H1 H2 Use With Part # The magnetic V-support block is used to hold and support large cylindrical steel or iron parts. The...