*mydirectindustry

Catalogs
FIVES PILLARD
ITAS Intensityflame

ITAS Intensityflame

Product catalog summary

Overview: The ITAS Intensityflame is a multifuel, high-power burner designed for various heating processes, capable of operating with natural gas, propane, butane, and other mixed gases. It offers a power range from 1MW to 55MW and features plug-and-play solutions to minimize commissioning time.

Applications: This burner is adaptable to numerous heating processes, including industrial and marine boilers, waste heat boilers, incinerators, steam generators, crude heaters, process heaters, superheaters, and process air heaters.

Design Features: The burner consists of a wind box, air volute, and combustor. It utilizes low-pressure combustion air, which rotates and swirls as it enters the combustor. The burner is mounted coaxially with a gas gun and finished with high-temperature paint. The combustor refractory can be installed on-site.

Operating Conditions: The burner models range from V6 to V36, with maximum heat liberation from 1.5MW to 55MW and minimum from 0.1MW to 4.1MW. Flame lengths and diameters vary across models. It supports UV or infrared flame detection and can operate with preheated combustion air up to 260°C.

Fuel and Emissions: The burner can handle natural gas, propane, butane, and other mixed gases. It features a raw gas pilot and can be equipped with a factory-installed refractory muffle block. NOx emissions are less than 100 ppm at 3% O2 with natural gas firing, and CO emissions are less than 150 ppm at 3% O2.

Dimensions and Installation: The document provides detailed dimensions for each burner model, ensuring proper installation and integration into existing systems. The burners can be oriented horizontally or vertically and are available as packaged units with valve trains, combustion air blowers, and controls.

Contact Information: For further inquiries, contact Fives ITAS S.p.A. at Via Metauro 5, 20900 MONZA MB, Italy, or via email at [email protected].

Catalog excerpts

ITAS Intensityflame Multifuel and high power burner Plug and play solutions to reduce commissioning time Features • Applications: any heating process • From 1MW up to 55MW • Can operate with natural gas, propane, butane and other mixed ga

Open the catalog to page 1

ITAS Intensityflame burner can operate from 1 up to 50 MW. Low pressure combustion air is used with all sizes. All units are available as complete packaged units or basic burners. TYPES OF APPLICATIONS ITAS Intensityflame burner can adapt to any heating process, like: — i ndustrial and marine boilers — combination waste heat boilers and liquid or gaseous incinerators — steam generators — crude heaters — process heaters and superheaters — process air heaters DESIGN FEATURES The main parts of ITAS Intensityflame burner are wind box, air volute and combustor. The combustion air is rapidly rotating and...

Open the catalog to page 2

OPERATING CONDITIONS BURNER SIZING CURVES FOR HIGH INTENSITY BURNER

Open the catalog to page 3

fives ultimate machines ultimate factory CONTACT US Fives ITAS S.p.A. Via Metauro 5 - 20900 MONZA MB - Italy Tel.: +39 039 27331 Email: [email protected] - Website: www.fivesgroup.com Copyright © 2016 - Fives - All rights reserved.

Open the catalog to page 4

All FIVES PILLARD catalogs and technical brochures

Archived catalogs

Pillard Packlight
2 Pages
Pillard flame scanners
4 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list