ITAS Ductflame Modular duct burners: F/L/R model for high temperature applications Plug and play solutions to reduce commissioning time Features • Applications: ovens, dryers, and fume incinerators • From 100kW to 30 MW • TAS Ductflame may be combined with other equipment in order to adapt to installation I structure and to supply variable pow

Air and fuel gas mixing is controlled in order to optimize both emission and efficiency; moreover, mixing takes place on nozzle outlets, thus avoiding any back firing. ITAS DUCTFLAME: MODEL F TYPES OF APPLICATIONS — Designed for applications requiring the production of large warm and clean air masses — All installations, where process air (such as fumes from gas turbine) may be used as combustion air, for example, atomizing burners for ceramics and steam-producing heaters — Each burner will be designed according to the process condition, depending on special application Other gas types upon request...

ITAS DUCTFLAME: MODEL L TYPES OF APPLICATIONS — All installations, where the objective is to obtain air recovery, by introducing a minimum of fresh air quantity, like air recovery from oven — Each burner will be designed according to the process condition, depending on special application OPERATING CONDITIONS Other gas types upon request Higher turndown ratio can be reached with a burner staging.

ITAS DUCTFLAME: MODEL R TYPES OF APPLICATIONS — All processes, where combustion air quantity shall be as low as possible and controllable like high efficiency hoods in paper industry market — Each burner will be designed according to the process condition, depending on special application OPERATING CONDITIONS 750 °C Nominal capacity Turn each module (kw) down Differential pressure natural gas at burner inlet (mbar) Differential combustion air pressure (mbar) Higher turndown ratio can be reached with a burner staging. ultimate machines ultimate factory CONTACT US Fives ITAS S.p.A. Via Metauro...