ITAS Ductflame Modular duct burners: H/T/C model Plug and play solutions to reduce commissioning time Features • Applications: ovens, dryers, and fume incinerators • From 100kW to 30 MW • TAS Ductflame may be combined with other equipment in order to adapt to installation I structure and to supply variable pow

Air and fuel gas mixing is controlled in order to optimize both emission and efficiency; moreover, mixing takes place on nozzle outlets, thus avoiding any back firing. TYPES OF APPLICATIONS — Designed for applications requiring the production of large warm and clean air masses — Especially used to produce uniform and clean hot air with a short flame in a duct integrated to the process flow of the main machine — Possible applications are ovens, dryers, fume incinerators and all similar industrial installations — When treated air is not constant and/or with low O2 content, for example in dryers...

OPTIONS — ITAS Ductflame H may be arranged alone in horizontal or vertical line (see TAB. 1) — ITAS Ductflame T may be arranged alone or in combination with ITAS Ductflame H in various horizontal or vertical lines (see TAB. 2) — ITAS Ductflame C may be arranged alone or in combination with ITAS Ductflame H and/or ITAS Ductflame T in various horizontal or vertical lines. With these options we can reach a high capacity in a small combustion chamber DIMENSIONS The most important dimensions for installation are referred in Table 1 for ITAS Ductflame H and in Table 2 for ITAS Ductflame T. Any other...

Table 2 - Dimensions of modules and ducts - Power capacity - ITAS Ductflame T series Other dimensions/power capacities upon request fives ultimate machines ultimate factory CONTACT US Fives ITAS S.p.A. Via Metauro 5 - 20900 MONZA MB - Italy Tel.: +39 039 27331 Email: [email protected] - Website: www.fivesgroup.com Copyright © 2016 - Fives - All rights reserved.