*mydirectindustry

Catalogs
FIVES PILLARD
INDUCTFLAM® L

INDUCTFLAM® L

Product catalog summary

Overview: The document describes the Pillard INDUCTFLAM® L, a gas-fired grid burner designed for Heat Recovery Steam Generators (HRSG) operating in fresh air or turbine exhaust mode. It highlights the burner's capabilities in providing stable flames, easy operation switch-over, high turndown, and low emissions.

Specifications: The burner is suitable for use with the latest generation of gas turbines, which often operate with low oxygen content (9% to 12% O2) and high temperatures (400 to 650°C). It is designed to handle various gaseous fuels, including natural gas, LPG, refinery fuel gas with hydrogen, and low LCV gases like biogas.

Design Features: The burner features a compact and high-duty grid design that requires very low gas velocity and no baffles in the duct. It produces short flames (<3.5m) even with low oxygen levels and high duty, ensuring soot-free combustion and low emissions of NOx, CO, and dust, compliant with European norms.

Performance: The burner offers a high turndown ratio of 10 to 1, or 30 to 1 for special applications, and maintains high flame stability. It ensures an even temperature profile of flue gases downstream and has a reduced flame length. The construction is sturdy, capable of withstanding high induction temperatures and thermal shocks.

Installation and Maintenance: The burner is easy to install with readily insulated flange connections onto the duct. It requires low maintenance and complies with European and IS Standards/NFPA design for safety.

Applications: The burner is applicable for a range of 25 to 500MW and has a pressure drop of 5 to 10 daPa, depending on site conditions. Over 300 references of Pillard INDUCTFLAM® L burners are installed worldwide.

Contact Information: For further inquiries, contact Fives Pillard at [email protected] or call +33 (0)4 91 80 90 21.

Catalog excerpts

Pillard INDUCTFLAM® L Gasduct grid burners The most reliable gas fired grid burner for HSRG • For Heat Recovery Steam Generators in fresh air or turbine exhaust mode • Very low emission with latest generation of gas turbines (low O2 content ue gases) • Induct and /or interbank positioning • Even temperature prole thanks to CFD simulation • Stable flame, easy switch-over for TEG/FA operation, high turndown, low press

Open the catalog to page 1

Pillard INDUCTFLAM® L burner ensures ultimate performances and better temperature profile when firing gaseous fuel in turbine exhaust gas or fresh air mode The latest generation of gas turbines works sometimes with very low O2 content (9% to 12% O2, 400 to 650°C). Pillard INDUCTFLAM® L is a fuel gas red burner for turbine exhaust gases (TEG) designed especially for these type of installation. A COMPACT AND HIGH DUTY GRID BURNER DESIGN — Very low gases velocity required, no baffles in duct — Short flames (<3.5m) even with low oxygen and high duty — Very low upstream O2 acceptable without augmenting...

Open the catalog to page 2

All FIVES PILLARD catalogs and technical brochures

Archived catalogs

Pillard Packlight
2 Pages
Pillard flame scanners
4 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list