Vacuum chamber tests

Product catalog summary

Overview: The document describes a range of leak test machines designed by Fives Cinetic, specifically for testing with Nitrogen and Helium. These machines are tailored to meet high industry standards and are manufactured in compliance with applicable norms.

General Characteristics:

Production Rate: Capable of testing up to 60 units per hour, depending on the circuit type.
Test Fluids: Utilizes Hydrogenized Nitrogen, Helium, or a mix of Nitrogen and Helium.
Control System: Features a PLC/HMI Soft Rapidcharge® based on Siemens technology with an 8-inch display.
Testing Specifications:
- Connection: Adaptable to the product being tested.
- Vacuum Level: Less than 3 mbar, supported by a vacuum pump with a capacity of 25 m³/h.
- Pressure Test: Can handle up to 100 bars.
- Dimensions: Accommodates circuits up to 1 m³.
Chamber Specifications:
- Vacuum Level: Less than 1 mbar, with rotary vane pumps up to 650 m³/h and Roots pumps up to 2200 m³/h.
- Calibration: Automatic through a calibrated leak.
Leak Detection: Conducted via mass spectrometer analysis, with a leak level of 1.3 x 10^-6 Pa.m³/s (approximately 2 grams/year CO₂).
Electrical Supply: 400V three-phase at 50Hz and 480V three-phase at 60Hz.
Fluid Supply: Available from bottles or network.

Options:

Control Panel with Vacuum Sensor.
Identification and Traceability features including barcode reader and Ethernet connection.
Ergonomics and Test Fluid Generation.
Gas Mix Recovery and Pressure Test Generation.
Rework, Compressor, and Gas Holder options.

Additional Features:

Data storage on memory card and printer/Ethernet connection as per customer specifications.
Transfer of circuits via manual trolley, conveyor, or manipulator.
Gas mix storage in a gas holder with concentration percentage checks.
Helium pressurization cell and leak detection by sniffing.

Catalog excerpts

RT/AC/G-A Leak test machine Nitrogen / Helium A complete range of test equipment Fives Cinetic, designing today the test equipment of the future www.fivesgroup.com Driving Progress

Open the catalog to page 1

To fulfill the industries high requirements, CINETIC FILLING offers a complete range of test equipment, manufactured in accordance with the applicable norms which take in account the product specifics such as circuit configuration, required leak rate, productio rate… production GENERAL CHARACTERISTICS Chamber under vacuum Production rate Up to 60 units per hour (Depending on circuit type) Fluid for the test Hydrogenized Nitrogen / Helium / Mix Nitrogen Helium PLC / HMI Soft Rapidcharge® on a Siemens base / Display 8 ’’ color Connection : According to product to be tested Vacuum level : less than...

Open the catalog to page 2

Vacuum chamber tests

Vacuum chamber tests

Catalog excerpts

All Fives Cinetic SAS catalogs and technical brochures

Archived catalogs