Catalogs >
Fives Cinetic SAS >
Giustina EVOLUTION

Giustina EVOLUTION
2Pages

Catalog excerpts

Giustina EVOLUTION high speed peel grinder The Cinetic Giustina grinder model Evolution is the ideal machine for the puntiform grinding contact of shafts with diameters 10 ÷ 150 mm. The contourning process, the rigidity and the high removal speed allow a very high precision and an incomparable productivity. Its guarding, completely sealed, can guarantee a better and easier fumes suction, no leakage and higher safety during the process, together with a lower noise level. The Cinetic Giustina grinder model Evolution is a high speed grinder for the processing with only puntiform grinding contact, equipped with: CBN grinding wheel D = 400 mm, with dynamic balancing device Headstock - Tailstock with part clamping with dynamometric load control Grinding wheel and workpiece traversing high-speed sliding guides NC of all main functions Machine guarding Fives Cinetic, designing today the grinding solution of the future

Open the catalog to page 1

Giustina EVOLUTION high speed peel grinder Loading/Unloading Workpiece Loading and unloading on this machine is made in two different ways: • Manual mode: an operator, at automatic opening of the guarding door, picks up and places safely (wheel protected), the machined part or the part to be ground on proper cradles. The door closure is activated by the operator through the two-hand-held unit. When the door is closed the grinding cycle starts. • Automatic mode: the change of the finished part and of the one to be finished takes places automatically through a Cartesian gantry with grippers....

Open the catalog to page 2