Catalogs >
Fisnar Inc. >
VDP150

VDP150
1Pages

Catalog excerpts

VDP150 Volumetric Positive Displacement Valve The VDP150 plunger pump is a pneumatically operated positive displacement valve designed for dispensing constant volume shots of low to medium viscosity materials within 1%. The VDP150 has two integral check valves to control the flow of material. The valve is cycled by applying air pressure to 5,000cps) no fluid pressure is required, as the plunger. Low fluid pressure is required for medium viscosity materials of 5,000 -20,000cps. Shot sizes may be fine tuned by turning an adjustment control at the top of the valve. Features • Positive displacement metering • Integral inlet/outlet check valves • Stroke adjustment to fine tune shot size Models VDP150 Positive displacement valve Fisnar Asia Asia Headquarters Tel: 852-2389-2827 www.fisnareurope.co.uk the air ports. For low viscosity materials (less than material is drawn into the displacement chamber by the Sales & Support Fisnar Global Headquarters Tel: 1 (973) 646-5044 www.fisnar.com Fisnar Europe European Headquarters Tel: +00 44 (0) 1355 577 222 www.fisnareurope.co.uk Specifications Operating air pressure: Material delivery spring: Material delivery spring: Cycle Rate: Minimum shot size: Maximum shot size: Measuring type: Driving part materials Cylinder Body / Cap: Piston: Check Body: Wetted part materials Chamber,CAP, CV body: Plunger: Check valve: O-rings: Connecting ports Air Input: Material Inlet: Material Outlet: Weight:

Open the catalog to page 1