Dispensing Equipment

DSP501N Valves Dispenser & 3-Way Valve Controller Featuring a larger internal air solenoid recommended for 3-way control operations that require an immediate and fast reaction for de-pressurization. Examples include: Valves, collapsible toothpaste-type tube, caulking, cartridge reservoirs and rotary-table operations. Suitable for all types of fluids, includes a suck-back feature to ensure low viscosity liquids do not drip. Timing interval from 0.01 to 31 seconds. Features Model Valve & dispense timer DSP501N Barrel suck-back ensures no dripping Dispenser 110/220V CE Large solenoid air exhaust...

The VC1195N is a 4-way valve controller that can be used to control one or two valves simultaneously. The controller is suitable for all valves in the brochure identified as requiring or optionally accepting a 4-way controller. I The VC1195N valve controller provides a continuous "valve-off" state and remains in this mode until a signal is received to switch to "valve-on" mode. This instruction can derive from a remote robotic device or by the foot switch provided. When the timer is off, the valve will remain in "valve-on" state as long as the foot switch is pressed or to allow a robot to control...

Diaphragm Valve VD510 - Min. Shot Size 0.001 cc - Adjustable The VD510 is a diaphragm valve designed for precise flow control of low to medium viscosity materials. The diaphragm separates the wetted parts from the moving parts and, therefore, the valve is ideal for dispensing cyanoacrylates, reagents, electrolytes, glues, solvents, paints, alcohol and other volatile substances. The model DSP501N is a suitable controller for the VD510 valve. When air pressure is applied to the VD510 valve, the valve will open and the material will be dispensed. At the end of the dispense cycle a spring assists...

Cartridge Valve CV629 - Adjustable Cartridge Valve The CV629 is a pneumatically operated valve designed for precision dispensing of many types of fluids, such as solvents, oils, silicones, glues, UV adhesives, inks, etc. The system can be integrated with an automatic dispensing robot or used as a bench-dispensing valve. Avoid clean-up and maintenance by simply replacing the removable cartridge. The valve is opened by air pressure and closed by a return spring when air pressure is released. Applying inlet will open the valve. Fluid is supplied to the material inlet through a 1/8 BSPP port. Shot...

Poppet Valve VP300 - Min. Shot Size 0.05cc - Adjustable The VP300 is a multipurpose, poppet-type pneumatic valve designed for dispensing low to mid-high viscosity materials, such as silicones, RTV, epoxy, rubber adhesives, greases, liquids containing filler, etc. A diaphragm located between driving parts and wetted parts increases the valve life and reduces valve When air pressure is applied to the valve, the valve seat will open and the material will be dispensed. Shot sizes may be fine tuned by turning the control The VP300 valve has a suck-back effect that eliminates lumping at the end of...

Poppet Valve The VMP30H is a multipurpose, mini-poppet pneumatic valve designed for dispensing low to mid-high viscosity materials, such as silicones, RTV, epoxy, rubber adhesives, greases and filled materials. The poppet design minimizes surface area and friction between the valve piston and the material, making it ideal for filled materials and extending the life of the valve seals. A diaphragm located between driving parts and wetted parts increases the valve life and reduces valve When air pressure is applied to the valve, the valve seat will open and the material will be dispensed. Shot...

Mini-Spool Valve VMS400 - Min. Shot Size 0.1 cc - Adjustable The VMS400 is a mini-spool type pneumatic valve designed for dispensing low viscosity to high viscosity When air pressure is applied to the air inlet of the VMS400 valve, the spool will be forced forward and fluid will be dispensed. The VMS400 valve has a suck-back effect that eliminates lumping at the end of the needle after dispensing. Turning the adjustment control at the top of the valve regulates Shot size and flow rate are controlled by the tip size, fluid pressure and the duration that the valve The model DSP501N is a suitable...

High Volume Valve 790HP-LF - High Volume - Spool Action The 790HP-LF series high-pressure dispense valve is an economic solution when dispensing high viscosity materials such as silicones, RTV, sealants and greases. The 790HP-LF provides a snap-release shut off after dispensing, resulting in a suck-back at the fluid outlet, preventing any drip or post extrusion. The 790HP-LF is a balanced type "on/off" segmented high-pressure spool valve. Applying a minimum of 50 psi to the air inlet will force the spool forward, under tension from an internal return spring, dispensing the Releasing the air pressure...

High Pressure Needle Valve HP600S - small shot, HP600L - large shot The HP600S and HP600L high-pressure dispense valves are a robust long-life solution for dispensing high viscosity materials such as silicone, RTV, sealant and grease. Both valves are adjustable for shot size. "on/off" segmented high-pressure needle valves, which require a model VC1195N 4-way valve controller. Applying a minimum of 56 psi to the air inlet will retract the needle allowing material to flow. Switching the air signal on the controller will return the needle to its seated position closing the valve. High-pressure valve...

High Pressure Needle Valve HPN200 - Adjustable - High Pressure Needle Valve The HPN200 is a high-pressure needle valve suitable for high viscosity materials at fluid pressures up to 1,700 psi. It also features a shot size stroke adjustment, which can easily fine tune the front closing needle for precise The valve is opened and closed by applying pressure to the ports. The valve may be operated with 56 psi. Material is supplied to the stainless steel body through a 1/4" NPT female port. Fluid pressure may be as high as 1,700 psi Shot size and flow rate are controlled by the tip size, fluid pressure...