Engineered Solutions Adjustable No-clog Spray Valve Fisnar spray valves provide close tolerance spray dispensing of fluids up to 1000 cps, including urethanes, flux and paints. The material is fed from a pressure reservoir. Each valve is actuated by air pressure sequenced by a controller. The operating air pressure opens a needle valve allowing material to flow; a separate air line creates pressure in the air cap, atomizing the fluid. The valves are adjustable by turning the stroke-adjust control at the rear of the valve; this will tune the spray pattern. Coating and flow rate are controlled by the fluid pressure, needle stroke, distance from the valve to the work and the duration the valve is open. Medium pattern Fluid viscosity range: Fluid pressure: 7-17 psi Over 200 cycles/min up to 2.4 l/min Spray pattern: Flow rate: Operating frequency: Circular (conical spray) M5xP0.8 with push-in fitting M5xP0.8 with push-in fitting Material inlet: Spray Path Character Minimum bead size SV2001N, SV2002N, SV2003N: Sales & Support Fisnar Global Headquarters Movement Speed: