Catalogs >
Fisnar Inc. >
SV1000SS Stainless Steel Spray Valve

SV1000SS Stainless Steel Spray Valve
1Pages

Catalog excerpts

SV1000SS Stainless Steel Spray Valve - 1

Engineered Solutions SV1000SS Stainless Steel Spray Valve The SV1000SS spray valve provides close tolerance spray dispensing of fluids of up to 1000 cps. The SV1000SS is constructed of stainless steel to prevent corrosion from volatile materials. With a spray angle of 12 degrees and an operating frequency of 200 cycles/min, the SV1000SS is designed for spraying flux, urethane, paint, lubricants, and for coating and conformal coating and marking applications. The valve is adjustable by turning the stroke-adjust control at the rear of the valve; this will tune the spray pattern. Coating and flow rate are controlled by the fluid pressure, needle stroke, distance from the valve to the work and the duration the valve is open. • Stainless Steel fluid body • Stroke adjustment to fine-tune spray area • Nozzle design prevents clogging Fluid viscosity range: • Suitable for spraying paint, flux, urethane, and lubricants Fluid pressure: Nozzle diameter: Flow rate: Operating frequency: Spray angle: Spray pattern: Circular (conical spray) 10-32 thread, fitting for 1/4 tube 10-32 thread, fitting for 1/4 tube Material inlet: Stainless steel spray valve Sales & Support Fisnar Global Headquarters Tel: 1 (973) 646-5044 www.fisnar.com

Open the catalog to page 1