video corpo

PPD-130

PPD-130

PPD-130

Product catalog summary
Overview: The PPD-130 is a peristaltic pump dispenser designed for air-free dispensing of low viscosity liquids. It is particularly suitable for handling hazardous or difficult liquids, minimizing operator contact.
Features:
  • Air-free dispensing with forward and reverse motion.
  • Instant reverse for snuff-back to prevent dripping.
  • Adjustable interval before reverse direction.
  • Options for Teflon and silicone tubing.
  • Operates in continuous or timer modes with a large digital LED display.
  • Output signal indicates the end of the dispense cycle.
  • Compatible with clean room environments.
Operation:
  • Suitable for small shots and continuous operation.
  • Adjustable rotor speed with volume settings from 0 to 10.
  • Self-priming from bottles or jars.
  • Teflon tubing for smaller discharges at lower flow rates; silicone tubing for larger discharges at higher flow rates.
  • Operated via a finger switch on the holder or remotely from an I/O connector.
  • Timer display counts down for discharge.
Specifications:
  • Cycle Rate: 0.01 - 99.99 seconds.
  • Flow Speed: 0.01 - 6ml/min with Teflon tube; 0.1 - 20ml/min with silicone tube.
  • Rotor Speed: Up to 120 rpm.
  • Dispense Pressure: Over 105 Kg/cm².
  • Input Voltage: 110-240 VAC - 50/60Hz; Internal Voltage: 5 VDC.
  • Dimensions: 7.18” x 3.20” x 6.73”; Weight: 6.6 lbs.
  • Standards: CE Approved, RoHS Compliant.
Functions:
  • Power Switch LED indicates activation.
  • RC mode for continuous cycling.
  • Timer mode with a range up to 99 seconds.
  • Continuous mode for uninterrupted operation.
  • Speed dial for rotor speed adjustment.
  • Vacuum dial for fluid suck-back post-dispense.
  • Adjustable vacuum interval (0-3 seconds).
  • Input jack for finger/foot switch plug.
  • Time set button for programming dispense time.
  • Timer Display shows dispense time.
  • Driv. CW and Driv. CCW for rotor direction control.
  • Guide lock and tube guide for tube placement.
  • Rotor head and tube holder for fluid movement.
See more

Catalog excerpts

PPD-130-1

Engineered Solutions Peristaltic Pump Dispenser Peristaltic pump dispensers transfer low viscosity liquids by pressure displacement applied to a turning rotor against a tube carrying material. Usually these pumps are chosen because the liquids are hazardous or difficult to work with and it is advisable to limit operator contact. Another reason is that peristaltic pumps are air free. The model PPD-130 offers excellent features for air-free positive displacement dispensing of materials such as cyanoacrylate, solvent, alkaline and acid. Dispense outputs can be timed from 0.01 - 99.99 seconds with flow speeds from 0.01 - 6ml/min using Teflon tubing and from 0.1 - 20ml/min using silicone tubing. The pump is bidirectional allowing snuff-back after discharge to prevent dripping of the fluid. Air free dispensing Forward and reverse motion Instant reverse for snuff-back cuts off liquid flow Adjustable interval before reverse direction Teflon and silicone tube options Continuous or timer modes Large segment digital LED display Output signal to indicate end of dispense cycle Clean room compatible Simple load mechanism also provides easy cleaning Suitable for small shots and continuous operation Adjustable rotor speed in volume 0 - 10 Self priming from bottle or jar Teflon tubing for smaller discharges at lower flow rates Silicone tubing for larger discharges at higher flow rates System operated by finger switch on holder or remotely from I/O connector at rear of unit • Timer display counts down for discharge

 Open the catalog to page 1
PPD-130-2

Peristaltic Pump Dispenser Functions 1) Power Switch 2) RC mode 3) Timer mode 4) Cont. mode 5) Speed dial 6) Vacuum dial 7) Vacuum interval 8) Input jack LED signals that the switch is on Cycles for as long as activated Time range - up to 99 seconds Continuous operation Adjusts the speed the rotor turns Fluid suck-back after dispense cycle Adjustable within 0-3 seconds Finger/foot switch plug 9) Time set button 10) Timer Display 11) Driv. CW 12) Driv. CCW 13) Guide lock 14) Tube guide 15) Rotor head 16) Tube holder Programming dispense time Displays dispense time Drives rotor clockwise Drives...

 Open the catalog to page 2

Archived catalogs

  1. General Catlogue

    120  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.