Dispensing Equipment brochure
24Pages

Dispensing Equipment

JB1113N Dispensers Pneumatic General Purpose Dispenser A popular analog dispenser series featuring dual 110/220V operation. An all-purpose dispenser, versatile and easy to use in a few simple steps – hook up the barrel adapter assembly (selection included) - connect the air and power - set the timer - load the barrel with material - set the air regulator – press the foot switch and start dispensing. Suitable for all types of fluids, includes a suck-back feature to ensure low viscosity liquids do not drip. Timing interval from 0.01 to 31 seconds. Features Model Dispense timer JB1113N Wide...

DSP501N DSP501N Dispenser & 3-Way Valve Controller Suitable for all types of fluids, includes a suck-back feature to ensure low viscosity liquids do not drip. Timing interval from 0.01 to 31 seconds. Dispensers Featuring a larger internal air solenoid recommended for operations that require an immediate and fast reaction for de-pressurization. Examples include: Collapsible toothpaste-type tube, caulking, cartridge reservoirs, valves and rotary-table operations. The higher volume exhaust prevents post compression of materials contained in tubes, avoiding stringing. Features Model Dispense...

DSP502N Dispensers Dispenser with Vacuum Gauge The DSP502N includes an analog gauge to provide a visual indication of the level of suck-back measured in psi. The unit’s larger internal air solenoid is recommended for operations that require an immediate high volume air exhaust, such as collapsible toothpaste-type tube, caulking, cartridge reservoirs, valves and rotary table operations. A higher volume exhaust helps prevents drooling of materials contained in tubes. Features Model Dispense timer DSP502N Suitable for tube dispensing Dispenser 110/220V CE Barrel suck-back ensures no dripping...

SL101N An automatic digital dispenser with a bright LCD display and “teach & learn” process programming. Up to 9 independent dispensing programs may be stored for fast recall. The SL101N has three modes of operation. The first is autocycling, which operates by sequencing a self-taught cycle of events including a dispense time together with a wait or pause condition between the cycles. This feature enables the SL101N to be used as a stand-alone semi-automated dispensing system. Manual-mode enables a dispense operation to be manually controlled by a foot pedal, and Timed-mode dispenses at a...

VC1195N Dispensers 4-Way Valve Controller The VC1195N is a 4-way valve controller that can be used to control one or two valves simultaneously. The controller is suitable for 790HP-LF, LV-0126RJ, 700RV, 800RV, VBP117, VDP305, VDP100,HPN200, HP600S, HP600L, VDP150, VMS400, VMP30H, VP300, and MV-0180LF valves. The valve controller provides a continuous “valve-off” state and remains in this mode until a signal is received to switch to “valve-on” mode. This instruction can derive from a remote robotic device or by the foot switch provided. When the timer is off, the valve will remain in...

Autotube Dispenser Colapsible Tube Dispenser The Autotube system was designed to dispense liquids, pastes, greases, silicones and similar liquids directly from the manufacturer's "collapsible" tube. The previous method of hand-squeezing the material out of the tube created many problems such as: • Transfer of the material was messy and wasteful. • Air bubbles were introduced during transfer. • Contamination was introduced during transfer. With the Autotube method all one has to do is to attach an "adapter" to the material tube, then drop the tube in a cartridge reservoir and you're ready to...

Clear Chamber Dispenser A clear glass pressure chamber for dispensing low viscosity liquids directly from bottles and up to 11b. jars. Regulated air pressure forces the liquid in the bottle up through a disposable tube to a connector, which can be interfaced to a valve or dispensing pen. The PP300-GL-A is ideal for control of hazardous materials, such as PP300-GL-A, 710PT-LF, DSP501N - pinch-tube valve system A combination of a 71OPT-LF pinch-tube valve mounted to the PP300-GL-A and controlled via a DSP501N dispenser can accurately and safely apply microshots of low viscosity liquids. All...

TD101 Engineered to specifically address the waste and discomfort that result from dispensing materials in collapsible tubes. A comfortable, balanced design that safely protects the tube from damage and the operator from contamination. These features eliminate waste and improve quality by avoiding the introduction of air bubbles when transferring material, thus reducing the possibility of particulate contamination and ensuring that the entire tube is exhausted. Regulated air supply is required. Specifications Features Eliminates waste Size: 7.50” x 3.00” x 6.75” (19.05 x 7.62 x 17.15cm)...

DB815 Dispensers Foot Valve Dispenser A basic air-powered system, floor mounted and foot actuated. Includes a three-way air valve and built in air regulator, ideal for non-critical dispensing operations. As long as the foot pedal is depressed, fluid will be dispensed. The unit is suitable for all types of fluids. The model with suck-back option ensures that low viscosity liquids do not drip. Features Economical and simple to use Model Barrel suck-back option ensures no dripping DB815-SB DB815 Wide range of applications Dispenser Dispenser with suck-back Heavy duty design Air Output Gauge...

Vacuum Pick-Up Systems VPP511-LF (electric foot switch operated) The VPP511-LF features an air solenoid electrically switched by pressing a foot pedal. This provides two advantages: 1. The vacuum is only actuated when the foot pedal is pressed. 2. The part can be released by foot pedal control, keeping the hand entirely still during the operation. Model VPP511-LF vacuum pick-up unit 110V 560046-NH* vacuum pick-up pencil no hole (included) VPPE511-LF VPP803-LF (Air only system) For delicate handling of small parts and components, including miniature, surface mount and chip scale packages....