Types MR95 and MR98 MULTI-PURPOSE INDUSTRIAL REGULATORS Types MR95 and MR98 The Types MR95 and MR98 regulators are compact, large capacity, direct-operated pressure regulators. The units are available in 1/4 NPT through 2-inch / DN 50 sizes and are offered in several different end connection congurations. They are designed to handle pressures up to 1000 psig / 68.9 bar and temperatures up to 650°F / 343°C. These products can help solve the toughest pressure control applications. Typical applications include superheated steam, steam injection, steam tracing, nitrogen purging, boiler feed water, process chemicals, cooling water, test xtures, wash tanks, sterilizers/autoclaves, fuel lines, pneumatic supply, and many others. Enhancements over Types 95 and 98: • New CF3M, LCC, Monel®, and Hasteloy® body material options provide improved corrosion, chemical, and temperature resistance. • The addition of Ethylenepropylene (EPDM), Peruoroelastomer (FFKM), and Stellite® trim options increase chemical, temperature, and application exibility. • Increased inlet pressure rating (1000 psig / 68.9 bar) and regulating capacities align with increasingly demanding applications in the market. • Inlet and outlet pressure gauge options ensure proper installation, startup, and function while expanding troubleshooting ability. • External control line option allows for pressure control at the point of use. • Re-engineered bottom plug and diaphragm sealing surface improves product reliability. Monel® is a mark owned by Special Metals Corporation. Hasteloy® C is a mark owned by Haynes International, Inc. Stellite® is a mark owned by Deloro Stellite Holdings Corporation.

The One Stop For Your Complete Industrial Regulating Solutions. Fisher® pressure reducing and backpressure regulators area available in a wide range of sizes and contructions to satisfy your application requirements. 1. For high-pressure actuator constructions with Fluorocarbon (FKM) diaphragm, maximum outlet and emergency casing pressures are limited to 230 psig / 15.8 bar or the body rating limit, whichever is lower. 2. For high-pressure actuator constructions with Fluorocarbon (FKM) diaphragm, maximum set pressure is limited to 150 psig / 10.3 bar. Emerson Process Management Regulator Technologies,...