Catalogs >
FISHER REGULATORS >
Fisher™ YD and YS Control Valves

Fisher™ YD and YS Control Valves
24Pages

Catalog excerpts

Product Bulletin Fisher™ YD and YS Control Valves Fisher YD and YS three-way cage-guided valves are designed for throttling or flow-switching (on-off) service, and are available in the following constructions: YD (Balanced)—For general converging (flow-mixing) and diverging (flow-splitting) service. Available in standard and high-temperature versions (see figure 1). YS (Unbalanced)—For general converging service. When used in diverging service, recommended for on-off applications only (see figure 1). The Fisher YD and YS product lines are available for a wide range of applications, including sulfide and chloride stress-cracking environments common to the oil and gas production industries. To discuss available constructions, contact your Emerson sales office and include the applicable codes and standards required for these environments. Features n Economy--Balanced valve plug construction in the YD permits use of smaller, lower-cost actuators. A single one-piece valve accommodates both trim designs and uses Fisher easy-e™ bonnets, gaskets, and packing, thus cutting spare part inventory costs. n Application Flexibility--Multipurpose capability results from a valve designed specifically for three-way control. A variety of valve sizes, end connections, port diameters, and trim materials provides design versatility for your control needs. n Long Trim Life--Hardened trim materials provide Fisher YD Valve with 667 Actuator n Excellent Sealing Capabilities--The ENVIRO-SEAL™ packing system option is available. This packing system provides excellent sealing, guiding, and loading force transmission. The improved sealing of the ENVIRO-SEAL system can help control emissions to below the EPA (Environmental Protection Agency) limit of 100 ppm (parts per million) from valves. The ENVIRO-SEAL packing systems feature PTFE, Graphite ULF, or Duplex packing with live-loading for reduced packing maintenance. n Parts Commonality--Packing parts, including packing flange, studs and nuts, and packing kits, are common to the YD, YS, and Fisher easy-e control valves. excellent wear resistance. n Valve Plug Stability-- Rugged cage guiding provides n Easy Maintenance--Cage-type construction simplifies inspection and removal of parts. high valve plug stability, which reduces vibration

Open the catalog to page 1

Product Bulletin Specifications Valve Sizes, Ratings, and End Connections (1,2) Operative Pressure/Temperature Limits(1, 2) Pressure Drop Limit Due to Gasket Loading: See table 1 Shutoff Pressure Drop Limits with Typical Actuators: See tables 6, 7, and 8 Pressures and Temperatures for Trims Only: See figure 7 Temperatures for Body-Trim Combinations: See table 5 Temperatures for All Other Parts: See table 3 Cast Iron Valves Flanged: NPS 1 through 6 CL125 flat-face or 250 raised-face flanges per ASME B16.1 Screwed: NPS 1/2 through 2 consistent with ASME B16.4 Steel and Stainless Steel Valves...

Open the catalog to page 2

Product Bulletin D100031X012 Specifications (continued) Bonnet Styles See table 11 Valve Plug Styles YD: Balanced, metal-seated YS: Unbalanced, metal-seated Construction Materials Valve Body and Bonnet:J Cast iron (except extension bonnet), J WCC steel, J WC9 chrome moly steel, J C5 chrome moly steel, or J CF8M (316 SST) Trims: See table 2 All Other Parts: See table 3 Rated Travels and Port Diameters See table 1 Yoke Boss and Stem Diameters for Actuator Mounting VALVE SIZE, NPS VALVE STEM AND YOKE BOSS DIAMETERS, INCHES Standard Yoke Boss Approximate Shipping Weights Optional Stem Yoke Boss...

Open the catalog to page 3

Product Bulletin ENVIRO-SEAL Packing System Specifications Applicable Stem Diameters J 9.5 mm (3/8 inches), J 12.7 (1/2), J 19.1 (3/4), andJ 25.4 (1) diameter valve stems Maximum Pressure/Temperature Limits(1) To Meet the EPA Fugitive Emission Standard of 100 PPM(2) For ENVIRO-SEAL PTFE and ENVIRO-SEAL Duplex packing systems: full CL300 up to 232_C (450_F) For ENVIRO-SEAL Graphite ULF packing system: 104 bar (1500 psig) at 316_C (600_F) Construction Materials PTFE Packing Systems Packing Ring and Lower Wiper: PTFE V-ring(3) Male and Female Adaptor Rings: Carbon-filled PTFE V-ring...

Open the catalog to page 4

Product Bulletin Figure 2. Construction Details - NPS 8 YD-High Temperature UPPER CAGE GASKETS VALVE BODY LOWER CAGE PLUG Flow Directions Figure 3. Construction Details - NPS 8 YD YD (Common Port on Bottom) see figure 6 n Plug Down, Left-Hand Port Closed--Flow in BONNET UPPER CAGE CAGE ADAPTOR converging service is from right to bottom port and in diverging service is from bottom to right port. n Plug Up, Right-Hand Port Closed--Flow in converging service is from left to bottom port and in diverging service is from bottom to left port. PLUG n Intermediate Plug Positions--Flow in converging...

Open the catalog to page 5

Product Bulletin 51.1:YD September 2020 n Plug Up, Right-Hand Port Closed--Flow in converging service is from bottom to left port and in diverging service is from left to bottom port. n Intermediate Plug Positions--Flow in converging service is from both bottom and right ports to left port, with capacities in proportion to plug travel. Figure 4. Cutaway of ENVIRO-SEAL Bellows Seal Bonnet and Internal Shroud, Showing Bellows D100031X012 For applications requiring compliance with environmental protection regulations, the unique ENVIRO-SEAL packing system (figure 5) and, for hazardous service,...

Open the catalog to page 6

Product Bulletin Figure 5. ENVIRO-SEAL and HIGH-SEAL Packing Systems PACKING BOX STUD ANTIEXTRUSION RING PACKING RING FOLLOWER PACKING VALVE BONNET LANTERN RING TYPICAL HIGH-SEAL PACKING SYSTEM WITH GRAPHITE ULF PACKING TYPICAL ENVIRO-SEAL PACKING SYSTEM WITH PTFE PACKING PACKING BOX STUD SPRINGS FOLLOWER PACKING TYPICAL ENVIRO-SEAL PACKING SYSTEM WITH GRAPHITE ULF PACKING TYPICAL ENVIRO-SEAL PACKING SYSTEM WITH DUPLEX PACKING

Open the catalog to page 7

Product Bulletin Table 1. Travel, Port, and Gasket Loading Pressure Drop Information MAXIMUM RATED TRAVEL SEAT RING PORT DIAMETER PRESSURE DROP LIMIT DUE TO GASKET LOADING YS YD(1) 1. For standard YD only. For high temperature YD, consult your Emerson sales office. 2. NPS 8 only available in YD construction. Table 2. Trim Materials MATERIAL Valve Plug Upper Cage and Lower Cage Upper Cage Retaining Ring (High-Temperature YD Only) Upper Seat Ring (YS Only) and Lower Seat Ring 1. Standard trim for stainless steel valves. Figure 6. Flow Directions

Open the catalog to page 8