1. Catalogs
  2. FISHER REGULATORS
  3. Approximate Vaporization Capacities of LP-Gas Tanks
cad

Approximate Vaporization Capacities of LP-Gas Tanks

Approximate Vaporization Capacities of LP-Gas Tanks

Product catalog summary
Specifications:
- Chemical Formula: C3H8
- Boiling Point: -44 to -42 °C
- Specific Gravity (Air = 1): 1.53
- Liquid Density at 60°F: 4.24 pounds per gallon
- BTU per Gallon of Liquid at 60°F: 19,745
- BTU per Pound of Gas: 21,591
- BTU per Cubic Foot of Gas at 60°F: 2,516
- Cubic Feet of Vapor per Gallon of Liquid at 60°F: 36.93
- Cubic Feet of Vapor per Pound of Liquid at 60°F: 8.745
- Latent Heat of Vaporization at Boiling Point: 587.0 BTU per Gallon

Combustion Data:
- Cubic Feet of Air Required to Burn 1 Cubic Foot of Gas: 23.68
- Flash Point: -156 to -104 °C
- Ignition Temperature in Air: 920 to 1020 °C
- Maximum Flame Temperature in Air: 1,953 °C
- Flammability Limits in Air: Lower Limit 2.4%, Upper Limit 9.6%
- Octane Number: Over 100

Propane Tank Capacities:
- Domestic Tank Sizes and Vaporization Capacities at 40% Liquid
- Water Capacity (Gallons): 120 to 1000
- Corresponding BTU per Hour at 20°F and 60°F

Standard Domestic Propane Tank Specifications:
- Capacity (Gallons): 120 to 1000
- Diameter (Inches): 24 to 41
- Length (Inches): 68 to 192
- Weight (Pounds): 282 to 3,891

Orifice Capacities:
- Drill Size and Corresponding BTU per Hour
- Pressure: 11 inches of water column
- Orifice Coefficient: 0.9
See more

All FISHER REGULATORS catalogs and technical brochures

  1. R Series

    2  Pages

  2. LP-31

    96  Pages

  3. CS 200 series

    2  Pages

  4. 1301F, 1301G

    12  Pages

  5. MR95 and MR98

    2  Pages

  6. 630 Regulator

    16  Pages

  7. S200 series

    32  Pages

  8. R622 series

    8  Pages

  9. cs200 series

    40  Pages

  10. CS400 Series

    60  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.