Specifications Sheet CSI 6500 Machinery Health™ Monitor A6500-TP - Temperature / Process Card The A6500-TP Temperature Process Card is a component of the CSI 6500-ATG Machine Protection System. The card is equipped with 4 measuring channels for temperature measurements with thermocouples or resistance temperature detectors (RTDs) and for measurements of process signals 0 - 1 V, 0 - 10 V or 0/4 - 20 mA standard signals. Besides this, the card contains 2 digital inputs and 6 digital outputs. The measured signals are transmitted through the internal RS 485 bus to the A6500-CC Com Card and converted to Modbus RTU and Modbus TCP/IP protocols for further transmission to host computers or analysis systems. In addition, the Com Card provides the communication through the USB socket at the face plate for the connection to PC/ laptop for the configuration of protection cards and for visualization of measuring results. Apart from that, the measuring results can be output through analog outputs 0/4 - 20 mA. These outputs have a common ground and are electrically isolated from system supply. The operation of the A6500-TP Temperature Process Card is performed in the A6500-SR System Rack, which also provides connection of supply voltages and signals. The A6500-TP Temperature Process Card provides the following functions: QQ Temperature measurement with RTDs QQ Temperature measurement with thermocouples with internal and external cold junction compensation QQ Measurement of standard process signals 0 - 1 V, 0 - 10 V or 0/4 - 20 mA QQ Acquisition of digital signals with two digital inputs QQ Output of analog values for each measuring channel through 4 current outputs 0/4 – 20 mA QQ Output of alarms through 6 digital outputs, the assignment to the measuring channels can be configured in any way Signal Inputs Number of Inputs Four (Up to Eight in Temperature Mode) independently configurable for different temperature sensors or process signal inputs, nonreactive, short circuit proof. Input Resolution The four inputs are galvanically isolated against each other based on levels of IEC 60204-1, respectively IEC 61131-2 Voltage Process Inputs Range Temperature Drift ±0.5% of full scale within operating temperature range of -20°C to +70°C QQ Two-channel, 3U size, 1-slot plugin module decreases cabinet space requirements in half from traditional four-channel 6U size cards. QQ API 670 compliant, hot-swappable module. QQ Self-checking facilities include monitoring hardware, power input, hardware temperature, sensor, and cable. QQ Use with 2,3 or wire RTD´s, thermocouples, or analog process input s

Specifications Sheet CSI 6500 Machinery Health™ Monitor Current Process Inputs Range Temperature drift ±0.5% of full scale within operating temperature range of -20°C to +70°C RTD Sensor Inputs Type Excitation current Cable resistance <120 Ω per wire and if ex-application, including possible safety barrier impedance Temperature drift ±1 K within operating temperature range of -20°C to +70°C Thermocouple Inputs Type Cold junction compensation exterior use RTD sensor input for cold junction compensation (CJC) Capacity <10 μF including sensor cable Temperature drift ±1 K within operating temperature...