Saxon range
2Pages

Saxon Range 1-8 Zone Conventional Control Panels Key Features ♦ Built-in detector removal indication facility ♦ From 1 to 8 zones ♦ 4 Alarm circuits on 4-8 zone panels ♦ Conforms to the requirements of EN54-2 ♦ User-friendly access code ♦ One-man test facility ♦ Non-latching zone feature ♦ Class change input ♦ Earth fault monitoring ♦ Fully-functional repeater available (4 & 8 zone panels only) ♦ Removable cable-entry grommets ♦ User-friendly controls ♦ Surface or semi-flush mounting as standard ♦ Ample termination space ♦ Flame-resistant polycarbonate enclosure ♦ Log book and manual supplied ♦ Complies with EMC and LVD directives Introduction The Saxon Range conventional panel may be supplied in 1, 2, 4 or 8 zone formats. It complies with the requirements of EN54 Part 2. All zones and alarm circuits are monitored for open and short circuit fault conditions with detector removal facility also provided as standard. The cabinet will house 2 x 12V 2.1AH S.L.A. batteries wired in series, which will sustain an 8 zone panel for up to 24 hours. All panels have a zone 1 non-latch facility to enable panel interlinking without “lock-up” occurring. The class change input enables the alarm circuits to operate without panel indication or panel latching. The cabinet back-box houses only the transformer, thus providing a virtually empty enclosure for first fix installation. A steel gland plate, removable plastic grommets and ample space are designed to assist with cable termination. A slide-in insert is included for clear zone identification. The surface-mount electronics motherboard is fitted and terminated after first fix installation. Finally a terminal cover completes the panel installation. The 4 & 8 zone panels will accommodate up to 3 repeater panels, which are connected by a shielded 2- core data cable where the repeater panels are powered locally, or an additional 2-core may be run from the panel for power (Max. 1 repeater may be powered from the panel). From the UK's leading control panel manufacturer FIREGUARD SAFETY EQUIP CO.LTD,2ND FLOOR, 145-157 ST.JOHN STREET, LONDON EC1V 4PY UNITED KINGDOM Phone: +44 (0)8450 751042 Email: info@fireguard-uk.com Fax: +44 (0)8450 751043 Website: www.fireguard-uk.com

- + - NORMALLY OPEN SWITCH + + ZONES 2-8 SAME AS ZONE 1 - 1A 2A + - 1 2 + + DETECTOR BASE WITH SCHOTTKY DIODE ALARMS 1, 2 & 3 SAME AS ALARM 4 CLASS CHANGE - + 12V BATTERY - MANUAL CALL POINT WITH 680R RESISTOR + 12V BATTERY - + + 22uF CAPACITOR End-Of-Line Device 3K9 RESISTOR End-Of-Line Device - Typical Connections AUX FAULT N/O P N/C AUX FIRE N/O P N/C ALARM CIRCUITS ZONE 8 AL4- AL4+ AL3- AL3+ AL2- AL2+ AL1- AL1+ Z8- Z8+ ZONE 1 Z1- Z1+ REPEATER AUX 24V B A SCN 24V 0V BAT- BAT+ SECONDARY EARTH AC IN . . ~ ~ LINK FOR BUZZER ENABLE 1234 ON RA0 RA1 Z1NL NU L E N 230V AC 50Hz 5A MAINS SUPPLY...