VEE DN 10÷50 Easyfit 2-way ball valve

FIP and Giugiaro Design designed and developed VEE Easyfit, the innovative True Union ball valve with union nut tightening control, that permits simple and safe installation for reliable service in time. The valve is specifically designed for water conveyance applications. EASYFIT 2-WAY BALL VALVE • Patented Easyfit system: innovative mechanism based on the principle of the bevel gear pair that controls valve union nut rotation during installation. • Connection system for solvent weld and threaded joints • Valve material compatibility (PVC-U) with water, drinking water and other food substance...

Two position Easyfit ergonomic multifunctional handle with union nut tightening control which can be used to adjust ball seat carriers. Handle use is especially indicated for maintenance work where space is limited and hard to access Labelling System using the LCE module (available as an accessory). The grey protection plug housed on the handle can be replaced with the transparent plug and customisable tag holder with the LSE set (available as an accessory). The customisation lets you identify the valve on the system according to specific needs 3 The PE ball seat system with locked carrier adjustable...

For water and harmless fluids to which the material is classified as CHEMICALLY RESISTANT. In other cases, a reduction of the nominal PN pressure is required (25 years with safety factor). PRESSURE VARIATION ACCORDING TO TEMPERATURE PRESSURE DROP GRAPH The K100 flow coefficient is the Q flow rate of litres per minute of water at a temperature of 20°C that will generate Ap= 1 bar pressure drop at a certain valve position. The Kv100 values shown in the table are calculated with the valve completely open. The information in this leaflet is provided in good faith. No liability will be accepted concerning...

VEEIVEasyfit 2-way ball valve with female ends for solvent welding, metric series d Easyfit 2-way ball valve with BSP threaded female ends

VEELVEasyfit 2-way ball valve with female ends for solvent welding, BS series d VEEAVEasyfit 2-way ball valve with female ends for solvent welding, ASTM series d

VEENVEasyfit 2-way ball valve with female ends, NPT thread R VEEJVEasyfit 2-way ball valve with female ends for solvent welding, JIS series d

VEEBEVEasyfit 2-way ball valve with PE100 SDR 11 male end connectors for butt welding or electrofusion (CVDE) d

CVDE Long spigot PE100 end connectors for joints with electrofusion fittings or for butt welding EASYTORQUE KIT Kit for union nut tightening adjustment and ball seat carrier for Easyfit DN 10^50 valves. Union nut tightening torque* Seat carrier tightening torque* •calculated in ideal installation conditions

Transparent protection plug with tag holder d Customisation and label printing set for Easyfit handle made up of precut adhesive sheets and software for guided label creation. VEE-VXE code

The Easyfit VEE DN 10÷50 valve is set for the customisable Labelling System. This system lets you create special labels to insert in the handle. This makes it extremely easy to apply company logos, identification serial numbers or service indications such as, for example, the valve function in the system, the transported fluid, but also specific information for customer service, such as the customer name or installation date or location on the valves. The grey protection plug (A) housed on the handle can be replaced with the specific LCE accessory module. This module is made up of a rigid transparent...

2 Stem O-rings (EPDM - 1)1 6 Radial seal O-Ring (EPDM - 1)1 8 Ball seat carrier (PVC-U - 1) 10 Socket seal O-Ring (EPDM- 2)1 Spare parts The component material and quantity supplied are indicated in the parentheses.

1) Isolate the valve from the line (release the pressure and empty the pipeline). 2) Fully unscrew the union nuts (13) from the valve body and slide the body out sideways (fig. 5-6). To do this, we recommend you use the Easyfit handle as a tool (fig. 9-10) 3) Before dismounting, hold the valve in a vertical position and open it 45° to drain any liquid that might remain. 4) After closing the valve, remove the handle (12) (fig. 7) and insert the two protrusions in the lower side in the two apertures and in the carrier passage bore (8), extracting it by turning counter-clockwise (fig. 8). 5) Press...

Before proceeding with installation. please follow these instructions carefully: 1) Check that the pipes to be connected to the valve are aligned in order to avoid mechanical stress on the threaded joints. 2) Unscrew the union nuts (13) and slide them onto the pipe. 3) Solvent weld or screw the end connectors (7) onto the pipe segments. 4) Position the valve between the end connectors (fig. 6). Warning: if a high pressure test is required, always position the body with the "REGULAR" label upstream from the fluid direction. 5) Fit the union nuts on the valve body and manually tighten clockwise...