Catalogs >
Finn-Power >
SP100

SP100
1 / 1Pages

Catalog excerpts

CRIMPING | SIDE FEED | SP100 SP100 Finn-Power SP-series crimping machines with open C-frame structure are optimal for crimping any odd shape, bent or otherwise complex hose assemblies. SP100 with 10 ton force is specially designed for small automotive hoses. TECHNICAL DATA Crimping range (mm) 1) Crimping range (inch) 1) Max. crimping force (tonnage) Hose size ID (inch) Motor Power (kW/HP) DIMENSIONS (LxWxH) Machine (mm) Machine (inch) SP100 also available in following configurations: - Z-model with separate crimping head and hydraulic unit - S-model with enhanced cycle time - D-model with double head configuration (on request) STANDARD FEATURES Foot pedal (part no 691563) Pressure crimping ICC1 Step crimping ICC2 OPTIONS Foot pedal, Z-model (part no 691563) Auto greasing G3 Remote control unit R2 (double hand) Quality control ICC3 Graphical quality control ICC4 Interface pack ETH (Communication TCP/IP & UDP) A3 signal Bar Code Reader BCR 1) With standard dies. Crimping range can be increased with special dies. 2) Theoretical with 10mm cycle. 3) See table for die set data. 4) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place. In addition to the standard die sets, a wide range of special die sets is available on request.

Open the catalog to page 1