Cable Float Level Switch FineTek C€ <g> Innovation • Quality • Sharing

PRODUCT INTRODUCTION DESCRIPTION WORKING PRINCIPLE The Float Level Switch is made from chemical resistant polypropylene. It is durable, low-cost,and specially designed to assist with long range and multiple point level detection in liquids. It is also suitable for tanks containing pumps and granular solutions. The Cable Float Level Switch is a structured by using either micro switches proximity switches or reed switches to control the contact. It’s userfriendly design is ideal for level measurement. The switches will transmit an ON or OFF contact signal output when the float rises and turns upwards....

Dimensions (Unit:mm) ModelSwitchFloat material FAC A/B/C Round type Micro switch FAP A/B/C Cup type Micro switch FAR A/B/C Cup type Micro switch Cable spec Neoprene Cable 1mm2x3C or 2C Contact rating Contact form Operating temp. Specific gravity Weight approx. Pressure Wire voltage Isolation resistance Contact resistance Actuation angle Protection

ModelSwitchFloat material FAD A/B/C Cup type Micro switch FAE A/B/C Cup type Micro switch Cable spec Contact rating Contact form Operating temp. Specific gravity Weight approx. Pressure Wire voltage Isolation resistance Contact resistance Actuation angle Protection Neoprene Cable PVC Cable FAS A/B/C Metal type Mercury switch SUS304

Dimensions (Unit:mm) FAK A/B/C Bar type Reed Switch P.P. Float material Cable spec Contact rating PVC Cable Neoprene Cable 0.75mm2x3C 0.75mm2x3C AC70 VA / DC50 W(N.O), 20W(N.C, SPDT) Contact mode Operating temp. Specific gravity Weight approx. Pressure Wire voltage Isolation resistance Contact resistance Actuation angle

CONTACT MODE1. SPST (N.O) FACA FARA/FADA FASA FARB/FADB FASB FARC/FADC FASC

WIRING Micro Switch Reed Switch When the float hasn’t contacted the liquid, the blue and black wires are in an open state and the contact mode will be NC. When the liquid level rises and lifts the float until it reaches the actuation angle, the brown and black wires will be in an open state and the contact mode will be NO. When the liquid level is low, the metal ball remains away from the sensing range and the brown and black wires are in an open state (NC mode). When the liquid level rises and lifts the float until it reaches the actuation angle, the brown and black wires will be in an open...

INSTALLATION GUIDE DIMENSIONS The float’s action length (a) must be shorter than the distance between the wall and the cable (A) ; if not,it will not function accurately. The lowest float level (d) must be higher than the lowest water level of the pump (D). Float lowest level d Lowest level of pump PRECAUTIONS Keep a proper distance between the installation position and the water pump inlet to prevent the float switch from being sucked in towards the pump. There should be a proper distance between the installation position and water inlet to prevent any direct water impact. If it can't be avoided,...

APPLICATION The FBX type is suitable for installation from the tank’s roof/top for level control and monitoring. POWER SOURCE R S T MAGNETIC SWITCH Power Switch MODEL: FBB(FLB) High Alarm High Alarm Pump On Pump OFF Low Alarm

Float type and switch- f 90*110 Micro switch(10A) f 90*110 Micro switch(15A) f70*108 Micro switch(10A) f70*108 Micro switch(15A) f29*145 Micro switch(3A) f29*145 Micro switch(3A)+Ground f29*145 Reed Switch f29*145 Reed Switch+Ground f75*120 Mercury switch is suggested to apply Reed Switch contact models in PLC or DCS control. P1: Float PP Neoprene cable P2: Float PP PVC cable C1 : Float PVC Neoprene cable C2: Float PVC PVC cable M3: Float SUS304 Silicon cable

HOW TO ORDER CABLE FLOATS (FB TYPE) Various types of multi-point products can be selected to meet the user's needs. For example: FBX10000-99999C type is suitable for corrosive solutions. FBX10000-99999B type is suitable for high-temperature waste water DISTANCE OF CONTROL POINTS NO cable fixed wire PP weight FAPW (CS-PP-W)

FBX 1 0 0 0 0 -@@ Float type and switch- (Next page) CC: f29*145 Micro switch(3A)+Ground CF: f29*145 Reed Switch CG: f29*145 Reed Switch+Ground DA: f 75*120 Mercury switch ^ It is suggested to apply Reed Switch contact models in PLC or DCS control. @@ Float and cable material- P1: PP Float Neoprene Neoprene cable P2: PP Float PVC cable C1: PVC Float Neoprene Neoprene cable C2: PVC Float PVC cable M3: SUS304 Float Neoprene cable B: B type Housing aluminum C: C type Housing plastic (PP) double into the line mouth 1/2"PF f 117.2X64.5 AK: JIS-FF AN: ANSI-RF AS: DIN-FF

@@ Flange materialMA: SUS304 MB: SUS316 18 : PP@@ Float with weight quantity Code

Taiwan FineTek Co., Ltd. - Taipei Head Quarter No.16, Tzuchiang St., Tucheng Industrial Park New Taipei City 236, Taiwan EMAIL: [email protected] Aplus Finetek Sensor Inc. - US Office 355 S. Lemon Ave, Suite D Walnut, CA 91789 TEL: 1 909 598 2488 FAX: 1 909 598 3188 EMAIL: [email protected] FineTek GmbH - Germany Office Bei den Kampen 26 21220 Seevetal-Ramelsloh, Germany TEL: +49-(0)41 85-8083-1 2 FAX: +49-(0)41 85-8083-80 EMAIL: [email protected] EMAIL: [email protected] Fine automation Co., Ltd. - Shanghai Factory No.451 DuHui Rd, MinHang District, Shanghai, Bei den Kampen 26 21220 Seevetal-Ramelsloh,...