*mydirectindustry

Catalogs
FINDER S.p.A. con unico socio
PIR Movement and presence detector and Switching actuator

PIR Movement and presence detector and Switching actuator

Product catalog summary

Overview
The document provides technical specifications and features of two products: a PIR movement and presence detector (Type 18.5K.9.030.0000) and a switching actuator (Type 19.6K.9.030.4300), both utilizing KNX technology for energy-efficient and flexible control systems in residential and commercial buildings.

PIR Movement and Presence Detector (Type 18.5K.9.030.0000)

Powered via KNX bus.
Sensing area covers up to 64m²: 8x8 m for movement detection and 4x4 m for presence detection.
Can be mounted on the surface or recessed into the ceiling.
Features include ambient light threshold adjustment, PIR sensitivity adjustment, and master/slave mode for extended sensing area.
Provides data telegram outputs for load control and movement/presence detection.
Includes a function to inhibit ambient light threshold control and reports light level and movement status for security purposes.

Switching Actuator (Type 19.6K.9.030.4300)

Powered via KNX bus with 6 relay outputs.
Features bistable relay ENEC approved with a maximum peak current of up to 120 A.
Suitable for various lamp loads, including 230 V halogen (2000 W), 230 V LED or CFL (400 W), fluorescent tubes (750 W), and single-phase motor load (0.5 kW).
Mounts on a 35 mm rail (EN 60715), 70 mm wide.
Each output contact is rated 16 A 250 V AC and can be configured as NO or NC.
Includes LED status indicators for each output and supports time functions (ON, OFF, Blink, Staircase).
Offers independent logic and analog functions for each output, such as AND, OR, XOR, THRESHOLD, and WINDOW.
Supports scenario management.

KNX Technology Compliance

Complies with European Standards (CENELEC EN 50090 and CEN EN 13321-1), International Standard (ISO/IEC 14543-3), Chinese Standard (GB/T 20965), and US Standard (ANSI/ASHRAE 135).

Disclaimer
Finder reserves the right to alter characteristics at any time without notice and assumes no liability for damage caused by incorrect use or application of its products.

Catalog excerpts

PIR Movement and presence detector and Switching actuator-1

Type 18.5K.9.030.0000 PIR movement and presence detector • Supply voltage via KNX bus • Sensing area up to 64m2: 8x8 m movement, 4x4 m presence • Surface or recessed ceiling mounting SWITCH TO THE FUTURE PIR Movement and presence detector and Switching actuator with KNX technology Type 18.5K.9.030.0000 Type 19.6K.9.030.4300 Type 19.6K.9.030.4300 Compact and powerful switching actuator with 6 relay outputs • Supply voltage via KNX bus • Bistable relay ENEC approved (Maximum peak current up to 120 A) • Suitable for lamp loads • 35 mm rail (EN 60715) mount, 70 mm wide

Open the catalog to page 1

PIR Movement and presence detector and Switching actuator-2

Type 18.5K.9.030.0000 Movement and presence detector with KNX technology Type 19.6K.9.030.4300 Switching actuator with KNX technology KNX The KNX bus system and standard allows the realisation of flexible control systems to achieve energy-efficiency and comfort in the home or commercial buildings. KNX complies with: - European Standards (CENELEC EN 50090 and CEN EN 13321-1) - International Standard (ISO/IEC 14543-3) - Chinese Standard (GB/T 20965) - US Standard (ANSI/ASHRAE 135) Type 18.5K.9.030.0000 PIR movement and presence detector • Supply voltage via KNX bus • Sensing area up to 64m2: 8x8...

Open the catalog to page 2

All FINDER S.p.A. con unico socio catalogs and technical brochures

Archived catalogs

Modular monostable relays 20 A
6 Pages