PCB Relay with forcibly guided contacts according to EN 50205 type B 2 CO contacts* • High physical separation between adjacent contacts • Cadmium Free contact materials • 8 mm, 6 kV (1.2/50 ps) isolation, coil-contacts • Flux proof: RT II * According to E N 50205 only 1 NO and 1 NC (11-14 and 21-22 or 11-12 and 21-24) shall be used as forcibly guided contacts. For UL ratings see: “General technical information" page V Contact specification Contact configuration Rated current/Maximum peak current A Rated voltage/ Maximum switching voltage V AC Rated load AC1 VA Rated load AC15 (230 V AC) VA Single phase motor rating (230 V AC) kW Breaking capacity DC1: 30/110/220 V A Minimum switching load mW (V/mA) Standard contact material Coil specification Nominal voltage (UN) V AC (50/60 Hz) V DC Rated power AC/DC VA (50 Hz)/W 13- Copper side view 50.12...5000 • For safety applications • Gold plate contacts for low level switching capability • 5 mm pinning • PCB mounting Copper side view Operating range AC (50 Hz) Must drop-out voltage AC/DC Technical data Mechanical life AC/DC cycles Electrical life at rated load AC1 cycles Operate/release time ms Insulation between coil and contacts (1.2/50 ps) kV Dielectric strength between open contacts V AC Ambient temperature range °C Environmental protection Approvals (according to type)

50 SERIES Forcibly guided contacts relay 8 A Ordering information Example: 50 series forcibly guided contacts, 2 CO (DPDT) 8 A contacts, 24 V DC coil. A B C D See coil specifications Selecting features and options: only combinations in the same row are possible. Preferred selections for best availability are shown in bold.

50 SERIES Forcibly guided contacts relay 8 A Contact specification Coil specifications R 50 - DC coil operating range v ambient temperature DC coil data Standard coil Nominal voltage Un