32 SERIES Subminiature PCB relays 6 A Printed circuit mount 6 A relay • 1 Pole changeover contacts or 1 Pole normally open contact • Subminiature, low profile package • Sensitive DC coil - 200 mW • Wash tight: RT III • Cadmium Free contacts Contact specification Contact configuration Rated current/Maximum peak current Rated voltage/ Maximum switching voltage 32.21-4000 1 CO (SPDT), 6 A Low coil power PCB mount Copper side view 32.21-4300 1 NO (SPST-NO), 6 A Low coil power PCB mount Copper side view Single phase motor rating (230 V AC) Minimum switching load Standard contact material Coil specification Nominal voltage (UN) Rated power AC/DC Operating range Holding voltage Must drop-out voltage Technical data Mechanical life AC/DC Electrical life at rated load AC1 Operate/release time Insulation between coil and contacts (1.2/50 ps) Dielectric strength between open contacts Ambient temperature range Environmental protection Approvals (according to type)

32 SERIES Subminiature PCB relays 6 A Ordering information ■ Example: 32 series PCB, 1 NO (SPDT-NO) - 6 A contacts, 24 V sensitive DC coil. A A B c d Selecting features and options: only combinations in the same row are possible. Preferred selections for best availability are shown in bold.

32 SERIES Subminiature PCB relays 6 A Contact specificationF 32 - Electrical life (AC) v contact current (A) H 32 - Maximum DC1 breaking capacity • When switching a resistive load (DC1) having voltage and current values under the curve, an electrical life of > 50 • 103 can be expected. • In the case of DC13 loads, the connection of a diode in parallel with the load will permit a similar electrical life as for a DC1 load. Note: the release time for the load will be increased. Coil specifications DC coil data - 0.2 W sensitive R 32 - DC coil operating range v ambient temperature Nominal voltage Un...