SMg

SMg

SMg

Product catalog summary
Overview: The SMg scrubbing machines, including models SMg120 and SMg130, are robust and powerful cleaning solutions designed for industrial environments. They are suitable for cleaning areas up to 20,000 sq. m and are available in two versions: Basic and Full Optionals.
Specifications: The SMg120 features two disc brushes with a 120 cm working width, while the SMg130 has two cylindrical brushes with a 130 cm working width. Both models have a large solution tank capacity of 275 liters and are equipped with advanced features to enhance cleaning efficiency and safety.
Key Features:
  • Eco ON/OFF System: Automatically stops water flow and brushes when idle, reducing energy consumption by up to 30%.
  • FimapSolutionSaver (FSS): Saves up to 50% on detergent usage by optimizing the water and detergent mix.
  • FimapWaterFlow (FWF): Ensures uniform distribution of detergent solution for consistent cleaning results.
  • Comfort Drive System: Adjustable seating for operator comfort.
  • Safety Features: Includes speed reduction on bends, antiskid wheels, hydraulic brakes, and optional safety belts.
Performance: The machines offer high productivity with theoretical cleaning capacities of up to 8400 sqm/h for the SMg120 and 9590 sqm/h for the SMg130. The brush pressure and speed can be adjusted to suit different cleaning needs, ensuring excellent performance on various surfaces.
Comfort and Usability: The machines are designed for user-friendliness, with features like low noise operation, easy access to controls, and quick maintenance procedures. The SMg130's cylindrical brushes allow for the collection of small debris, which can be easily emptied from the debris hopper.
Environmental Impact: The machines are designed to minimize environmental impact by reducing detergent usage and energy consumption, contributing to sustainable cleaning practices.
Technical Data: Both models operate on a 36V power supply with a battery run time of up to 4 hours for the SMg120 and 3.25 hours for the SMg130. They feature a transport speed of approximately 6.7 km/h and are equipped with a 1266 mm wide squeegee.
Certifications: The document mentions certifications but does not specify which ones. For more information or a demonstration, contact a Fimap dealer.
See more

Catalog excerpts

SMg-1

SMg scrubbing machine. It is robust, powerful and suitable for industrial environments cleaning. FIMAP

 Open the catalog to page 1
SMg-2

SMg scrubbing machine It is suitable for heavy dirt cleaning of industrial environments up to 20,000 sq. m. SMg floor scrubbers represent Fimap top of the range of cleaning machines. They are available with 2 disc brushes of 120 cm working width (SMg120) and with 2 cylindrical brushes of 130 cm working width (SMg130). Large solution tank capacity

 Open the catalog to page 2
SMg-3

Eco ON/OFF system: automatically stops water flow and brush when the machine is idle. 1Device for speed and water quantity reduction on bends to assure always maximum drive safety and excellent drying. “ Comfort Drive System: the operator can adju

 Open the catalog to page 3
SMg-4

Work with SMg incomparable performances! It is available also in cylindrical version for solid wastes collection SMg130 is equipped with two cylindrical brushes thanks to which it is possible to collect even small solid debris and convey them into the debris hopper. The hopper can be easily emptied at the end of cleaning operations, taking it out from the right side. Work with SMg great autonomy! up to 4 hours The installation of all innovative elements such as the new generation electronically controlled motorwheel and the new Eco ON/OFF system that stops the brushes and water flow when the...

 Open the catalog to page 4
SMg-5

Work with SMg technologies! With the new Fimap dosing system FSS (FimapSolutionSaver), during normal maintenance cleaning operations, surfaces can be scrubbed with water and detergent SAVING up to 50%. This assures a high increase of machine productivity, scrubbing with the same water quantity the double surface. The detergent distribuition is made from a 20 litres tank. The operator can easily fill up with detergent through the proper filling up opening, without coming into contact with the chemical product, working as a consequence in complete safety. The possibility to dose the right quantity...

 Open the catalog to page 5
SMg-6

Work with SMg user-friendliness! Set the working speed Scrubbing/Drying Drying Brush head lateral movement Scrubbing only Adjust cleaning solution and brush head pressure according to the type of dirt to remove ... AND START TO WORK! Work with SMg power! SMg are equipped with new generation motorwheel that allows to clean at high speed and in total safety thanks to antiskid wheel The double vacuum motor ensures excellent cleaning results also on uneven surfaces. Filters proper cleaning keeps constant vacuum performances

 Open the catalog to page 6
SMg-7

The possibility to get on/off from both sides ensures the maximum accessibility to driving controls and increases the operator safety The large diameter drain hoses have been placed in a position that allows to quickly and completely empty both the recovery and solution tank FFF, FimapFastFill to quickly fill the solution tank Recovery tank can be electrically rotated Reduced squeegee dimensions, as wide as the machine External socket for battery charging The squeegee can be rotated to facilitate rubber blades cleaning The brush head can laterally come out up to 15 cm to efficiently clean along...

 Open the catalog to page 7
SMg-8

TECHNICAL DATA For any additional information or for a demo please contact your usual Fimap dealer FIMAPwww.fimap.com Fimap Spa reserves the right, at anytime, to make technical and/or equipment modifications without prior notification. The images are shown as reference only and are not binding as to the actual design and/or equipment - Copyright © Fimap 2012 - COD. 301821 - AF - 10-2019 FIMAP spa - Via Invalidi del Lavoro, 1 - 37059 S. Maria di Zevio - Verona - Italy Tel. +39 045 6060411 - Fax +39 045 6060417 - E-mail: [email protected]

 Open the catalog to page 8

All Fimap catalogs and technical brochures

  1. CB-1

    24  Pages

  2. FIMOP

    8  Pages

  3. V1

    20  Pages

  4. Genie XS

    8  Pages

  5. Genie E/B/Bs

    8  Pages

  6. GL-GXL

    24  Pages

  7. My16

    8  Pages

  8. JMx

    12  Pages

  9. EMx

    24  Pages

  10. Maxima

    24  Pages

  11. MxL

    24  Pages

  12. MXR

    8  Pages

  13. BMg

    28  Pages

  14. MR

    20  Pages

  15. Mr

    8  Pages

  16. MMg

    28  Pages

  17. Magna

    32  Pages

  18. MG

    28  Pages

  19. GMG

    36  Pages

  20. GMG Combinata

    44  Pages

  21. Broom

    2  Pages

  22. FSW5

    2  Pages

  23. FSR

    8  Pages

  24. FSR7

    28  Pages

  25. FSR8

    28  Pages

  26. FS80-90-110

    8  Pages

  27. FS100-120

    8  Pages

  28. NANO

    2  Pages

  29. FV15.1

    2  Pages

  30. FV9+

    2  Pages

  31. FV-CART

    4  Pages

  32. UP35

    2  Pages

  33. FV20.1 WD

    2  Pages

  34. FV36.1 WD

    2  Pages

  35. FV66

    2  Pages

  36. FV30/60/80

    4  Pages

  37. FE P35.1 WD

    2  Pages

  38. FE A65.2 DP

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.