GMG
36Pages

{{requestButtons}}

Catalog excerpts

GMG - 2

Reduce cost to clean and get the greatest return on your investment in short term • Increase productivity, by cleaning with greater power and 30% faster than a conventional model of the same category • Increase productivity, by cleaning ramps with slopes up to 20% at full load • Increase productivity, with the possibility to install batteries of different technologies, from lead acid batteries to advanced lithium-ion ones, which provide up to 10 hours of run time on a single charge • Reduce the time required for U-turns within logistics centres aisles, by changing direction in one smooth...

Open the catalog to page 2
GMG - 3

SIMPLICITY • Reduce operator training, with on-board video tutorials which show how to perform common operation and maintenance activities • Increase uptime, with easy and intuitive access to key features through the iD – Intelligent Drive system • Enhance control over cleaning results, with pre-set work programs and supervisor controls that ensure proper machine setting and use by the operator • Reduce service time and cost, with fully accessible design that enables easy and quick servicing SUSTAINABILITY • Reduce the use of resources, saving water, chemical and energy thanks to Fimap...

Open the catalog to page 3
GMG - 4

A scrubbing machine designed to exceed your expectations in the most demanding industries PARKING LOTS LARGE-SCALE RETAIL

Open the catalog to page 4
GMG - 6

Accurate details highlight the robustness of its design It stands out for the strength of its design that enhances the sense of protection PROTECTION • FOR ENVIRONMENTS It blends in perfectly, has no protruding parts • FOR THE USER It has a comfortable and safe driving position that enhances visibility and control • FOR THE MACHINE ITSELF Long-lasting, rotationally moulded plastic tanks and steel wrap-around bumper protect mechanical components, while anticollision sensors prevent potential collisions by warning when approaching an obsta

Open the catalog to page 6
GMG - 7

BRUSHLESS MOTORS Motors without brushes bring several advantages: ENDURANCE OVER TIME • MORE POWER, which is entirely used avoiding the dispersion that is normally caused by the friction of the brushes brushless motors • GREATER DURABILITY OVER TIME, as they do not generate heat, there is no need for ventilation which can cause damaging seepages conventional motors • COMPACT DESIGN, they leave more space to the volume of the tanks, thus increasing the working autonomy • GREATER CONTROL, which being electronic, and not electromechanical, automatically adjusts to the required performance,...

Open the catalog to page 7
GMG - 8

A comfortable space enables the operator to better focus on the cleaning task Every single detail of the driving position is designed to provide the perfect working conditions: a comfortable seat, easy access to controls, full control of activities, smooth manoeuvres, total visibility of the surrounding space The Eco Mode device reduces the noise level to clean without disturbing the other people around

Open the catalog to page 8
GMG - 9

A convenient step helps to sit in the driver’s seat Side paddles integrated into the steering wheel help the operator keep his attention and eyes on the driving direction Comfort driver’s seat The digital touch screen display creates a modern, high-tech environment where valuable information is shown in high resolution The side control panel provides easy access to functions, allowing the operator to work on settings without getting distracted Integrated USB ports for charging mobile devices The seat, with armrests and headrest, is sprung and adjustable, to suit the operator’s needs, thus...

Open the catalog to page 9
GMG - 10

Learning how to take care of GMG is easy, because it is the machine itself that guides you OPERATOR TRAINING VIDEO TUTORIALS They provide essential instructions to perform routine activities and to support the operator when a quick reminder is needed on proper operation and maintenance procedures USE AND MAINTENANCE MANUAL AND SPARE PARTS CATALOGUE It is possible to read directly from the display the Spare Parts Catalogue and the Use and Maintenance Manual, available in 24 languages. Any doubts concerning the machine can be solved immediately, thanks to the easy-to-read touchscreen display.

Open the catalog to page 10
GMG - 11

SERVICE LIGHTS The exclusive lights pack offers increased visibility of the parts which could require operator inspection, illuminating the relative zones with LED lights MAINTENANCE TOUCH POINT FFF–FIMAP FAST FILL YELLOW COLOUR-CODED PARTS LARGE DIAMETER HOSES It enables the solution tank to be filled up quickly without the presence of the operator The spray gun enables the cleaning of the recovery tank anywhere, even when there is no available tap nearby, reducing maintenance downtime. Parts which must be cleaned regularly at the end of every shift are colour coded in yellow for easy...

Open the catalog to page 11
GMG - 12

Outstanding performance in any challenge DUAL 3-STAGE VACUUM MOTOR Effective vacuum system which leaves the floor dry with no risk of slipping The layout of the squeegees helps to collect water and direct it towards the suction point, thus ensuring better drying. The floor is perfectly dried even in bends, thanks to the lateral movement of the rear squeegee, which always follows the course of the machine. SPEED FLR-FIMAP LONG RANGE PRODUCTVITY IS INCREASED BY UP TO RUN TIME up to with Li-ion batteries * In Eco Mode PRODUCTIVITY higher productivity than competing models of the same segment

Open the catalog to page 12
GMG - 13

SOLUTION TANK RECOVERY TANK SIDE BRUSH WITH VACUUM SYSTEM The side brush makes it easy to clean along walls and allows to reach under shelves. It is equipped with vacuum system, a unique innovation not available in any other model in the market, which increases drying performance even on bends IT WIDENS THE WORKING WIDTH, THUS INCREASING PRODUCTIVITY BY UP TO GREATER CLEANING POWER TO TACKLE THE MOST STUBBORN DIRT Adjustable brush pressure up to Brush rpm up to kg VACUUM WAND Enables cleaning areas that are difficult to reach with the machine and completing the operation every time

Open the catalog to page 13
GMG - 14

A power never seen before in a scrubber dryer REAR-WHEEL TRACTION WITH 2 INDEPENDENT MOTOR WHEELS The rear-wheel traction with 2 electronically controlled independent wheels provides GMG with the necessary power to easily overcome ramps of up to 20% working. In a multistorey car park, GMG is therefore able to move easily from one level to another, guaranteeing high grip when climbing, reliability and maximum control when manoeuvring.

Open the catalog to page 14

All Fimap catalogs and technical brochures

  1. CB-1

    24 Pages

  2. EMx

    24 Pages

  3. FSW5

    2 Pages

  4. FSR7

    28 Pages

  5. GMG Combinata

    44 Pages

  6. FV-CART

    4 Pages

  7. BMg

    28 Pages

  8. GL-GXL

    24 Pages

  9. Magna

    32 Pages

  10. MxL

    24 Pages

  11. Maxima

    24 Pages

  12. iMx

    8 Pages

  13. Mr

    8 Pages

  14. My16

    8 Pages

  15. MMx

    8 Pages

  16. My50

    6 Pages

  17. Genie E/B/Bs

    8 Pages

  18. MXR

    8 Pages

  19. SMg

    8 Pages

  20. MMg

    28 Pages

  21. FIMOP

    8 Pages

  22. Genie XS

    8 Pages

  23. Broom

    2 Pages

  24. FV9

    2 Pages

  25. FSR

    8 Pages

  26. FS100-120

    8 Pages

  27. FS80-90-110

    8 Pages

Archived catalogs

  1. E-Spray

    8 Pages

  2. KSANEX

    4 Pages

  3. FA15+

    2 Pages

  4. FV10-15

    2 Pages

  5. FS800

    8 Pages

  6. FS50

    4 Pages

  7. Mg1300

    8 Pages