FSR8
1 /28Pages

FSR8

FSR8
1 /28Pages

Catalog excerpts

FSR8-1

Your solution to the toughest challenges

 Open the catalog to page 1
FSR8-2

REFERENCE INDUSTRIES CLEANING AND MULTI-SERVICE CONTRACTORS PARKING LOTS TRADE FAIRS

 Open the catalog to page 2
FSR8-3

Unlike many models in its category, the FSR8 isn't powered by an endothermic engine, but by batteries. This is a much more efficient solution, due to the fact that there is no energy loss. Combustion engines, which generate heat through the combustion of fuel, inevitably lose much of the energy produced. The energy which remains - the kinetic energy, which makes the machine run and the engine components move - is much less. In an electrical motor, meanwhile, which does not need to warm up to reach maximum revs, the energy generated can all be used immediately, without any dispersion. The use...

 Open the catalog to page 3
FSR8-4

REFERENCE INDUSTRIES LARGE-SCALE RETAILING SHOPPING CENTRES

 Open the catalog to page 4
FSR8-5

Designed to protect your investment A painstaking development and design process gave shape to a machine body that encompasses and protects all the mechanical parts of the machine, covering and shielding them against damage from accidental impact The entire outer structure is made of high-density polyethylene, a solid, robust material with a long lifespan Any minor knocks during use are absorbed completely by the integrated bumpers The frame and structure are made of steel with anti-rust protection

 Open the catalog to page 5
FSR8-6

Some small but ingenious expedients can be of great help to the operator COMFORT Space is optimised to make the driving position comfortable even when working for several hours The footrest zone is designed to offer impressive space for the feet despite the compact dimensions of the machine The lowered footboard facilitates access from both sides, allowing the operator to climb on and sit down without any effort DRIVER SEAT WITH ARMREST AND SAFETY BELT For a comfortable, safe driving position SIDE CONTROL PANEL Membrane control panel for manoeuvring the solid debris hopper SIDE ACCESSORY HOLDER...

 Open the catalog to page 6
FSR8-7

BAG HOLDER AND DETERGENT HOLDER For other small items that might come in handy when working SIDE PADDLES The paddles integrated into the steering wheel help the operator keep his/her attention and eyes on the movement direction. By lightly pressing the left-hand paddle, the cleaning power is raised to the maximum level for 60 seconds. The right-hand paddle activates reverse movements The Eco Mode device reduces the noise level, to clean without disturbing NO TRAINING, THANKS TO INTUITIVE DRIVING The displays of the Pro and Plus versions enable easy, intuitive driving. The Eco Mode button ensures...

 Open the catalog to page 7
FSR8-8

QUICK AND EASY MAINTENANCE, NO TOOLS NEEDED When studying the design, one priority was how to guarantee easy, quick access to all those machine parts that require regular inspections and daily maintenance. The side brushes can be uncoupled easily without using tools Vacuum cleaner filter MAINTENANCE TOUCH POINT Helping the operator by simplifying his/her work also means reducing the costs and times for every work shift and ensuring the machine is always kept in good condition, thereby extending its working life and avoiding costly unforeseen interventions MAINTENANCE TOUCH POINT Access to the...

 Open the catalog to page 8
FSR8-9

The debris hopper of the basic version is divided into two containers. The waste is thus distributed over the two bins, enabling the operator to empty one at a time and thus lift a lighter load, making the operation easier and less tiring The battery compartment opens fully, enabling easy inspection and topping up of the liquid The compartment that houses the filters is fully visible, speeding up cleaning and replacement tasks CONTAINER VOLUME Polyester or paper panel filter litres each

 Open the catalog to page 9
FSR8-10

CONTAINER VOLUME Effective on the first pass, to get more out of every cleaning intervention SIDE BRUSHES to channel dirt into the central area FLAP LIFTING DEVICE To make it easier to move and pick up bulky residue SWEEPING UNIT WITH FORCE TECHNOLOGY Force technology, installed as standard, keeps the central brush in contact with the floor at all times. It intervenes automatically on the basis of the unevenness of the surface, ensuring that the pressure always remains the same, regardless of slopes or protrusions, to produce a uniform cleaning result on any floor

 Open the catalog to page 10
FSR8-11

Astonishing performance in any situation Thanks to electronic traction control, the FSR8 can adjust the power level to handle ramps easily and smoothly without stopping or slowing down, on gradients of up to 20%*. The possibility to exclude the vacuum function enables sweeping even on damp floors VACUUM ON/OFF WORKING AUTONOMY Transfer and working SPEED * Trailer ramp at net weight ** In Eco Mode

 Open the catalog to page 11
FSR8-12

Equipped to maximise productivity REAR VIEW CAMERA POWER MODE When the dirt is particularly concentrated in a small area, it may be useful to briefly boost the cleaning power. By activating Power Mode, the pressure on the central brush is increased for 60 seconds, along with the vacuum, to thoroughly remove all the dirt in a specific point in one single movement To ensure the desired cleaning results in all conditions and prevent the risk of tampering, the site supervisor can save a number of separate configurations with specific cleaning parameters for different work environments. The operator...

 Open the catalog to page 12
FSR8-13

ELECTRICAL HOPPER EMPTYING AT HEIGHT Hopper emptying takes place automatically without any effort for the operator, who can manoeuvre the waste hopper from the workstation via the instrument panel. The operation is electric, which offers a host of advantages in terms of performance, time and costs over a hydraulic system. Indeed, hydraulic circuits are subject to much more mechanical stress, are also more prone to malfunctions and breakages. They need to be inspected regularly, as do the oils that they contain, which need to be checked and replaced to prevent clogging. Any leaks can compromise...

 Open the catalog to page 13
FSR8-14

The different types of filters available ensure performance to meet any requirement SAFE AIR TECHNOLOGY: multi-stage filtering system Even the smallest particles are captured, thereby protecting the health of both the operator and the other people in the area Pocket filter in fabric or Tetratex® HEPA output air filter Polyester or paper panel filter AUTOMATIC FILTER SHAKER Ensures filtering performance is maintained over time, shaking the filter regularly to prevent clogging and extend its lifespan FRONT ANTI-DUST SKIRT The cover on the front brushes helps to hold down the dust, so it can be...

 Open the catalog to page 14

All Fimap catalogs and technical brochures

  1. CB-1

    24  Pages

  2. FIMOP

    8  Pages

  3. V1

    20  Pages

  4. Genie XS

    8  Pages

  5. Genie E/B/Bs

    8  Pages

  6. GL-GXL

    24  Pages

  7. My16

    8  Pages

  8. JMx

    12  Pages

  9. EMx

    24  Pages

  10. Maxima

    24  Pages

  11. MxL

    24  Pages

  12. MXR

    8  Pages

  13. BMg

    28  Pages

  14. MR

    20  Pages

  15. Mr

    8  Pages

  16. MMg

    28  Pages

  17. Magna

    32  Pages

  18. MG

    28  Pages

  19. SMg

    8  Pages

  20. GMG

    36  Pages

  21. GMG Combinata

    44  Pages

  22. Broom

    2  Pages

  23. FSW5

    2  Pages

  24. FSR

    8  Pages

  25. FSR7

    28  Pages

  26. FS80-90-110

    8  Pages

  27. FS100-120

    8  Pages

  28. NANO

    2  Pages

  29. FV15.1

    2  Pages

  30. FV9+

    2  Pages

  31. FV-CART

    4  Pages

  32. UP35

    2  Pages

  33. FV20.1 WD

    2  Pages

  34. FV36.1 WD

    2  Pages

  35. FV66

    2  Pages

  36. FV30/60/80

    4  Pages

  37. FE P35.1 WD

    2  Pages

  38. FE A65.2 DP

    2  Pages

Archived catalogs

  1. My50

    6  Pages

  2. MMx

    8  Pages

  3. iMx

    8  Pages

  4. FV9

    2  Pages

  5. Mg1300

    8  Pages

  6. FS50

    4  Pages

  7. FS800

    8  Pages

  8. FV10-15

    2  Pages

  9. FA15+

    2  Pages

  10. KSANEX

    4  Pages

  11. E-Spray

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.