1. Catalogs
  2. Filtronic
  3. Hades E-Band Active Diplexers

Hades E-Band Active Diplexers

Hades E-Band Active Diplexers

Hades E-Band Active Diplexers

Product catalog summary
Overview: The Hades E-Band Active Diplexers by Filtronic are designed to enhance RF performance while reducing costs for OEMs. These diplexers are suitable for both commercial and military applications, offering high power amplifiers and low noise figures.
Features: The diplexers operate in the 71-76GHz and 81-86GHz frequency ranges, with high power amplifiers providing Tx saturated powers up to >+30dBm and Rx noise figures below 4dB. They support high linearity for 1024QAM modulation and offer a wide 5GHz bandwidth with configurable gain options.
Options: Six configuration options are available, ranging from passive diplexers to those with integrated GaAs drivers, HPAs, and LNAs. The configurations offer varying Tx and Rx gains and power outputs.
Technical Specifications: The diplexers feature a WR-12 waveguide IO port type, with a common frequency range of 71-86GHz. Tx and Rx frequency ranges are 71-76GHz and 81-86GHz, respectively. The devices offer a small signal gain of 33dB, PSAT of 27dBm, and a noise figure of 5dB. Mechanical dimensions are 67.0mm x 25.0mm x 6.7mm, with a weight of 25g.
Applications: The Hades diplexers are suitable for long-range terrestrial and non-terrestrial E-Band communications, including airborne and HAPS applications. They incorporate a Tx RF power detector for calibration and ALC, with options for integrated temperature sensors and I2C EEPROM for storing calibration data.
Connector Pinout: The TA440/TA441 connectors include pins for LNA and driver bias voltages, ground, Tx RF reference and detector voltages, and I2C communication.
Contact Information: Filtronic, NETPark Plexus 1, Thomas Wright Way, Sedgefield, County Durham, TS21 3FD, UK. Tel: +44 (0) 1740 625163, Email: [email protected].
See more

Catalog excerpts

Hades E-Band Active Diplexers-1

Hades E-Band Active Diplexers Data Sheet Features 71-76GHz and 81-86Gz High Power Amplifiers Tx Saturated powers up to >+30dBm Rx NF <4dB High linearity supports 1024QAM modulation Wide 5GHz bandwidth Configurable gain options Suitable for commercial or military applications Improved SWAP for airborne & HAPS applications Description Filtronic’s range of Hades Active Diplexers enable original equipment manufacturers (OEM's) to reduce the cost of their E-band radios whilst significantly increasing RF performance. Our Active Diplexers incorporate a configurable range of GaAs PAs & LNAs within an E-Band diplexer, maximising performance whilst reducing size and weight. Active diplexers can be used in conjunction with a wide range of commercially available off the shelf (COTS) SMT compatible packaged GaAs or SiGe up and down converter solutions to boost performance beyond that achievable with surface mount products. This allows our customers to deploy configurable “standard power” and “high-power” E-Band links without changing the radio mechanics. Active diplexers incorporate a Tx RF power detector to facilitate Tx power calibration and ALC. Where specified, the modules can be supplied fully calibrated with Tx detector vs. frequency/power and Rx gain information stored onto an integrated I2C EEPROM. An integrated temperature sensor provides users with accurate amplifier temperature data. The WR12 port locations & directions can be configured upon request. The configurable nature of Hades allows us to incorporate a range of GaAs and/or InP amplifiers in both the Tx and Rx chain and includes the option to power combine 2 GaAs PAs to deliver market leading linear Tx powers delivering unparalleled performance for long range terrestrial and non-terrestrial E-Band communications. Options Include: Tx PSAT Passive Diplexer Diplexer with integrated GaAs HPA Diplexer with integrated GaAs HPA & LNA Diplexer with integrated GaAs Driver, HPA & LNA Diplexer with integrated GaAs Driver, HPA & LNA Diplexer with integrated GaAs Driver, DUAL HPA* & LNA * Two GaAs HEMT MMICs performance matched and power combined in waveguide to deliver maximum power.

 Open the catalog to page 1
Hades E-Band Active Diplexers-2

Hades E-Band Active Diplexers Data Sheet Hades Active Diplexer Option 5 Block Diagram LNA gate bias voltage LNA drain bias voltage Driver drain bias voltage Driver gate bias voltage HPA drain bias voltage HPA gate bias voltage HPA drain bias voltage 3V3 digital supply voltage

 Open the catalog to page 2
Hades E-Band Active Diplexers-3

Hades E-Band Active Diplexers Data Sheet TA440 Outline Specification Function Common Parameter Diplexer frequency range Over baseplate operating temperature –35 to +70C. All parameters referenced to common waveguide port. Min Tx input port type Bandwidth Diplexer waveguide IO port type Frequency range Small Signal Gain Tx Power control range Input return loss Output return loss (common port 71-76GHz) Frequency range Rx output port type Bandwidth Rx Gain (small signal) Noise figure Input return loss Output return loss Weight DC connector interface 25 Pads to mate with Samtec FSI-120-03-H-S-AD

 Open the catalog to page 3
Hades E-Band Active Diplexers-4

Hades E-Band Active Diplexers Data Sheet TA441 Outline Specification Function Common Parameter Diplexer frequency range Over baseplate operating temperature –35 to +70C. All parameters referenced to common waveguide port. Min Frequency range Tx input port type Bandwidth Diplexer waveguide IO port type Small Signal Gain Tx Power control range Input return loss Output return loss (common port 71-76GHz) Frequency range Rx output port type Bandwidth Rx Gain (small signal) Noise figure Input return loss Output return loss Weight DC connector interface 25 Pads to mate with Samtec FSI-120-03-H-S-AD...

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.