*mydirectindustry

UPW-Flow

Product catalog summary

Product Specifications:
The Filtrafine UPW-Flow Series Filter Cartridges are constructed with a highly asymmetric polyethersulfone membrane and polypropylene hardware, ensuring high flow rates and dirt holding capacity. The cartridges are available in various lengths ranging from 4" to 40" and have an outside diameter of 2.67". They are designed for high purity water applications with retention ratings from 0.04 to 1.2μm.

Performance Specifications:
These cartridges are absolute rated at >99.9% efficiency and can handle a maximum differential pressure of 75 psid at 68°F and 40 psid at 150°F. The recommended change-out differential pressure is 35 psid. They are compatible with many fluids due to various gasket and O-ring materials, including silicone, EPDM, Buna-N, Viton, and Teflon encapsulated Viton.

Operational Conditions:
The cartridges can be sanitized in place with common oxidizing agents and are manufactured under a certified ISO 9001 quality system in a Class 1000 clean room. They rinse up to 18 Megohm-cm with minimal throughput.

Ordering Information:
The cartridges are made from FDA-listed materials suitable for food contact applications. They are available with different end configurations and O-ring/gasket materials, including EPDM, Viton, Silicone, and Teflon encapsulated Viton.

Flow Rate vs. Differential Pressure:
The document includes a graph showing the relationship between flow rate and differential pressure for various retention ratings, indicating performance efficiency across different conditions.

Catalog excerpts

C Filtrafine UPW-Flow Series Filter Cartridges Highly Asymmetric Membrane Cartridges for High Purity Water Applications • Proprietary Highly Asymmetric Polyethersulfone Membrane Delivers a Combination of High Flow Rates and High Dirt Holding Capacity • Absolute Rated at >99.9% Efficiency with Retention • Retention Ratings from 0.04 to 1.2μm • Polypropylene Hardware Construction – Inert to Many Process Fluids Ensuring Wide Chemical Compatibility • Fast Rinse-Up to 18 Megohm-cm • Various Gaskets/O-rings Materials – Compatible with Many Fluids • Manufactured Under a Certified ISO 9001 Quality System • Manufactured in a Class 1000 Clean Room Product Specifications Materials of Construction: • • • • • Filter Media: Hardware: Sealing: Support Material: Gaskets/O-rings: Highly Asymmetric Polyethersulfone Membrane Polypropylene Thermal Bond Polypropylene Silicone, EPDM, Buna-N, Viton, Teflon Encapsulated Viton Dimensions (nominal): • • Outside Diameter: Lengths: Performance Specifications • Retention Ratings: Operation Conditions: • Maximum Differential Pressure: Recommended Change Out Differential Pressure: 35 psid (2.4 bar)

Open the catalog to page 1

FDA Listed Materials: Manufactured from Materials Which are FDA Listed for Food Contact Applications in Title 21 of the U.S. Code of Federal Regulations Sanitizing Agents: Cartridge May be Sanitized in Place with Common Oxidizing Agents. Consult Factory for Compatibility Information Rinse-Up: Cartridges will Rinse-Up to 18 Megohm-cm with a Minimum of Throughput Pre-Rinsing: A Pre-Rinse is Available upon Request Liquid Flow Rate vs. Initial Differential Pressure Clean Pressure Drop, PSID Flow Rate vs. Differential Pressure 0.04um 0.1um Flow rate is per 10" (254mm) cartridge. For liquids other...

Open the catalog to page 2

All Filtrafine catalogs and technical brochures

Archived catalogs

Carbon-Clean
2 Pages
Micro-Flow
2 Pages
Extra Flow
2 Pages
Wound-Fine
2 Pages
Poly-ADCT
2 Pages