C Filtrafine Puris-Fine Series Filter Cartridges High Purity Polypropylene Melt Blown Cartridge can be Used in a Wide Range of Applications • Graded Pore Structure Enhances Dirt Holding Capacity and Filtration Efficiency • Easy and Safe Cartridge Incineration or Disposal • 100% Polypropylene Construction • Cartridges are Free of Surfactants, Binders and Adhesives • Cartridges Materials are FDA Listed for Food and Beverage Contact • Materials are NSF Certified Product Specifications Materials of Construction: • • • • Filter Media: End Caps: Extended Core: Gaskets/O-Rings: Melt Blown Polypropylene Polypropylene Polypropylene Silicone, Buna-N, Viton, EPDM Dimensions: • Outside Diameter: • Inside Diameter: • Lengths: Performance Specifications • Retention Ratings: Maximum Differential Pressure: Recommended Change Out Differential Pressure: • 35 psid (2.4 bar) Manufactured from Materials Which are FDA Listed for Food Contact Applications in Title 21 of the U.S. Code of Federal Regulations All Puris-Fine Filter Cartridges are Free of Surfactants, Anti-static Agents, Binders and Adhesives

Liquid Flow Rate vs. Initial Differential Pressure Clean Pressure Drop, PSID Flow Rate, GPM, Water@AMB. Flow rate is per 10” cartridge. For liquids other than water, multiply the pressure drop by the fluid viscosity in centipoises Ordering Information PRS Product Name DOE = No Symbol 3 = SOE with 222 O-rings, Flat Closed End 8 = SOE with 222 O-rings, Fin End 7 = SOE with 226 O-rings, Fin End PE = PE Gaskets N = Buna-N E = EPDM V = Viton S = Silicone FS = Spring FSX = Spring Extend Core © 2012 Filtrafine, March 2012 Bulletin #C-001 All Right Reserved. Filtrafine has the right to change subject...