Catalogs >
Filtrafine >
Puris-Fine Series Filter Cartridges

Puris-Fine Series Filter Cartridges
2Pages

Catalog excerpts

Product Introduction Puris-Fine series filter cartridges are 100% made of high purity polypropylene resin, which is ideal for general particle reduction applications. It's easy and safe to incinerate or dispose used cartridges. The cartridges are manufactured by a high-tech melt-blowing machine results in a consistent quality and graded pore structure. Its graded pore structure enhances dirt holding capacity and filtration efficiency. In addition, Puris-Fine series filter cartridges are free of surfactants, binders and adhesives. It has an excellent advantage of non-fiber releasing, which indeed delivers superior performance. • Materials are FDA graded • Manufactured under a certified ISO 9001 quality system • NSF certified 50 psid (3.45 bar) @ ambient 25 psid (1.72 bar) @ 140°F (60°C) • Maximum Operating Temperature: 140°F (60°C) • Recommended Change Out Differential Pressure: 35 psid (2.4 bar)

Open the catalog to page 1

FDA Listed Materials Manufactured from materials which are FDA listed for food contact applications in Title 21 of the U.S. Code of Federal Regulations. Purity All Puris-Fine series filter cartridges are free of surfactants, anti-static agents, binders and adhesives. Flow Rate, GPM, Water@AMB. Flow rate is per 10“ cartridge. For liquids other than water, multiply the pressure drop by the fluid viscosity in centipoises Product Name Retention Rating Cartridge Length End Configuration Gasket/O-ring Material PE=PE Gaskets No Symbol=DOE Code 3=222/Flat Code 8=222/ Fin Code 7=226 / Fin, Bayonet...

Open the catalog to page 2