C Filtrafine POLY-ADCT Series Filter Cartridges Advanced Polypropylene Melt Blown Filter Cartridges with Polypropylene Core for Demanding Applications • Retention Ratings from 0.5um to 75um • Graded Pore Structure Increases Dirt Holding Capacity and Filtration Efficiency • Proprietary Center Core for Greater Mechanical Strength • Easy and Safe Cartridge Incineration or Disposal -100% Polypropylene Construction • Free of Surfactants, Binders, Anti-static Agents and Adhesives • All Materials are FDA Listed for Food and Beverage Contact • Double Open End and Single Open End Cartridge Configurations Available Product Specifications Materials of Construction: • • • • • Filter Media: Center Core: End Caps: Extended Core: Gaskets/O-Rings: Outside Diameter: Inside Diameter: Lengths: Polypropylene Polypropylene Polypropylene Polypropylene Silicone, Buna-N, Viton , EPDM Performance Specifications • Retention Ratings: Operating Conditions: Maximum Operating Temperature: 185oF (85oC) Recommended Change Out Differential Pressure: 35 psid (2.4 bar) All Materials Meet U.S. Food and Drug Administered Requirements for Food and Beverage Contact (CFR 177.1500) All Cartridge Components Meet USP-XXIII, Class V Criteria All Filter Cartridges are Free of Surfactants, Anti-static agents, Binders and Adhesives

Liquid Flow Rate vs. Initial Differential Pressure Clean Pressure Drop, PSID Flow Rate, GPM, Water@AMB. Flow rate is per 10” cartridge. For liquids other than water, multiply the pressure drop by the fluid viscosity in centipoises Ordering Information PAT Product Name PCore Material DOE = No Symbol 3 = SOE with 222 O-rings, Flat Closed End 8 = SOE with 222 O-rings , Fin End 7 = SOE with 226 O-rings, Fin End PE = PE Gaskets N = Buna-N E = EPDM V = Viton S = Silicone © 2010 Filtrafine, September 2010 Bulletin #C-004 All Right Reserved. Filtrafine has the right to change subject without any notice...