C Filtrafine Pleated-Flow Series Filter Cartridges High Performance Pleated Polypropylene Melt Blown Cartridges Deliver Consistent Performance and Long On-Stream Life • Proprietary Filter Media Produced for Filtrafine Delivers Highly Consistent Performance • Fixed Pore Construction – Resists Dirt Unloading at Maximum Differential Pressure • Polypropylene Construction – Inert to Many Process Fluids Ensuring Wide Chemical Compatibility • High Surface Area – High Flow Rates and Long Service Life Reduced Maintenance Costs • Rigid Polypropylene Core Enhances Structural Strength of Filter Cartridges • Fast Rinse-Up to 18 Megohm-cm • Various Gaskets/O-rings Materials – Compatible with Many Fluids • Manufactured in a Class 10,000 Clean Room • Manufactured Under a Certified ISO 9001 Quality System Product Specifications Materials of Construction: • • • • • Filter Media: Hardware: Sealing: Support Material: Gaskets/O-rings: Dimensions (nominal): • • Outside Diameter: Lengths: Polypropylene Polypropylene Thermal Bond Polypropylene Silicone, EPDM, Buna-N, Viton, Teflon Encapsulated Viton Performance Specifications • Retention Ratings : Operating Conditions: • Maximum Operating Pressure: Recommended Change Out Differential Pressure: 35 psid (2.4 bar)

FDA Listed Materials: Manufactured from Materials Which are FDA Listed for Food Contact Applications in Title 21 of the U.S. Code of Federal Regulations Toxicity: All Polypropylene Components meet the Specifications for Biological Safety as per the USP for Class VI-121°C Plastics (Gaskets/Orings Excluded) Purity: Cartridges are Free of Surfactants, Resins, Binders and Adhesives Sterilization: Multiple Autoclaving for 30 Minutes at 250°F (121°C) under No End Load Conditions. In-Line Steam Sterilization is Not Recommended. May be In-Line Sanitized with Hot Water at 180°F (82°C) for 1 Hour Liquid...