Catalogs >
Filtrafine >
Multipleat High Flow

Multipleat High Flow
2Pages

Catalog excerpts

C Filtrafine Multipleat High Flow Series Filter Cartridges High Flow Pleated Cartridges Incorporating Proprietary Melt Blown Filter Media • Very High Surface Area per Cartridge-High Flow Rates, Long Service Life and Reduced Maintenance Costs • Inside to Outside Flow Configuration-All Contaminants Held Within the Single Open Ended Filter • Available in 20", 40" and 60" Lengths • Proprietary Filter Media Produced for Filtrafine Delivers Highly Consistent Performance • Fixed Pore Construction – Resists Dirt Unloading at High Differential Pressures • Polypropylene Construction-Inert to Many Process Fluids Ensuring Wide Chemical Compatibility • Various Gasket/O-ring materials-Compatible with Many Fluids • Manufactured in a Class 1,000 Clean Room • Manufactured Under a Certified ISO 9001 Quality System Product Specifications Materials of Construction: • • • • • Filter Media: Hardware: Sealing: Support Material: O-rings: Melt Blown Polypropylene Polypropylene Thermal Bond Polypropylene Silicone, EPDM, Buna-N, Viton, Teflon Encapsulated Viton Dimensions (nominal): • • Outside Diameter: Lengths: Performance Specifications • Retention Ratings: Operating Conditions: • • Maximum Operating Temperature: 140°F (60°C) Recommended Change Out Differential Pressure: 30 psid (2.1bar) FDA Listed Materials: Manufactured from Materials Which are FDA Listed for Food Contact Applications in Title 21 of the U.S. Code of Federal Regulations Toxicity: All Polypropylene Components meet the Specifications for Biological Safety as per the USP for Class VI-121°C Plastics (Gaskets/ O-rings Excluded)

Open the catalog to page 1

Typical Applications • • • • • • • Food and Beverage Seawater Desalination Cooling Water Industrial Water RO Pre-filtration Amine Circulation Filtration Process Water and Waste Water Treatment Retention Rating / Liquid Flow Rate vs. Initial Pressure Drop Retention Rating (Absolute) µm Initial Pressure Drop 20”/508mm length (psid/gpm)/(x100)bar/lpm Initial Pressure Drop 40”/1016mm length (psid/gpm)/(x100)bar/lpm Initial Pressure Drop 60”/1524mm length (psid/gpm)/(x100)bar/lpm Recommended Maximum Flow Rate per Cartridge to Optimize System Performance Length of Cartridge Recommended Operation...

Open the catalog to page 2