Product Introduction MFGN series filter cartridges utilize glass fiber media with rigid polypropylene center core and color netting. Glass fiber media ensures high purity filtration and the polypropylene hardware endures high temperature. The fixed pore construction of media can resist dirt unloading at maximum differential pressure drop. Besides, MFGN series filters have large surface area which provides high dirt holding capacity and long on-stream life. The micron rating can be easily recognized by netting in different colors, which provides users quick determination. • Manufactured in a class 10,000 clean room • Manufactured under a certified ISO 9001 quality system ►-Materials of Construction • Filter Media: Glass Fiber • Outside Diameter: 2.67" (68mm) • Support Material: Polyester • Lengths: 10", 20", 30", 40" • Netting: Polypropylene • Sealing: Thermal Bond • Gaskets/O-rings: Silicone, Buna-N, EPDM, Viton, Teflon Encapsulated Viton Retention Ratings ►-Operating Conditions 2, 5, 10 pm Absolute • Maximum Operating Differential Pressure: 75 psid (5.1 bar) @ 68°F (20°C) 40 psid (2.8 bar) @ 150°F (65°C) • Maximum Operating Temperature: 220°F (105°C) • Recommended Change Out Differential Pressure: 35 psid (2.4 bar)

Liquid Flow Rate vs. Initial Differential Pressure 3.0 Gasket/O-ring Material Product Name Retention Rating Cartridge Length End Configuration DOE=Double Open End Code 3=222 / Flat Code 8=222/Fin Code 7=226 / Fin, Bayonet N=Buna-N E=EPDM V=Viton S=Silicone F=Teflon Encapsulated Viton © Copyright 2016, Filtrafine. All Right Reserved. Filtraflne has the right to change subject without any notice